Do you have a question about the Mars A3 and is the answer not in the manual?
Questions and answers
ms j r wallace-Bird
March 19, 2025
laminated item is stuck in the machine. How do you remove it?
1 comments:
Mr. Anderson
March 19, 2025
To remove a stuck laminated item from the Fellowes Mars A3 machine, follow these steps:
1. Ensure the laminator is turned off and unplugged. 2. If the item is stuck due to not using a pouch, always use a pouch in the future to prevent jamming. 3. If the pouch was not centered or straight, gently try to pull the item out from the entry or exit point. 4. If necessary, use the edge guide to help align the pouch properly before attempting another lamination. 5. If the issue persists, contact customer service for further assistance.
Page 2
ENGLISH On/Off Selector Ready Light (green) Wait Light (red) Carry Handle - for easy portability Pouch/Document Entry CAPABILITIES Pouch Thickness 75-80 micron 75-80 micron Maximum Width 220 mm 330 mm Estimated Heat-Up Time 7 Minutes 7 Minutes Voltage 220-240V~ 220-240V~ Approximate Cool-Down Time 90 Minutes 90 Minutes...
Page 3
BEFORE YOU LAMINATE LAMINATION STEPS TROUBLESHOOTING Problem Cause Solution Need Help? WARRANTY...
Page 4
W.E.E.E. English This product is classified as Electrical and Electronic Equipment. Should the time come for you to dispose of this product please ensure that you do so in accordance with the European Waste of Electrical and Electronic Equipment (WEEE) Directive and in compliance with local laws relating to this directive. For more information on the WEEE Directive please visit www.fellowesinternational.com/WEEE French Ce produit est classé...
Page 5
Norwegian Dette produktet klassifiseres som elektrisk og elektronisk utstyr. Hvis du har tenkt å bortskaffe dette produktet, vennligst se til at du gjør dette i overensstemmelse med det europeiske WEEE- direktivet (Waste of Electrical and Electronic Equipment) og ifølge lokalt lovverk forbundet med dette direktivet. For mer informasjon om WEEE-direktivet, vennligst besøk www.fellowesinternational.com/WEEE Polish Russian...
Page 6
France + 33-(0)-1-78-64-9100 Singapore + 65-6221-3811 Italia + 39-071-730041 United Kingdom + 44-(0)-1302-836836 United States + 1-630-893-1600 fellowes.com Australia Canada Deutschland France Japan Polska United Kingdom Benelux China España Italia Korea Singapore United States 2010 Fellowes, Inc. Part No. 401502/2...
Need help?
Do you have a question about the Mars A3 and is the answer not in the manual?
Questions and answers
laminated item is stuck in the machine. How do you remove it?
To remove a stuck laminated item from the Fellowes Mars A3 machine, follow these steps:
1. Ensure the laminator is turned off and unplugged.
2. If the item is stuck due to not using a pouch, always use a pouch in the future to prevent jamming.
3. If the pouch was not centered or straight, gently try to pull the item out from the entry or exit point.
4. If necessary, use the edge guide to help align the pouch properly before attempting another lamination.
5. If the issue persists, contact customer service for further assistance.
This answer is automatically generated