Table of Contents
Advertisement
1
Introduction
1.1
Overview
The
PicoScope 4000 Series Automotive
oscilloscopes for automotive diagnostic use. They are fully
backwards-compatible with
as power is supplied from the USB port, making these oscilloscopes highly portable.
The PicoScope 4000 Series Automotive Oscilloscopes are supplied with the
software
9
Your Automotive Oscilloscope is supplied with these items:
USB cable, for use with USB 1.1 and USB 2.0 ports
Automotive software and reference CD
Quick start guide
1.2
Minimum PC requirements
For your
PicoScope 4000 Series Automotive
must connect it to a computer with the minimum requirements to run Windows or the
following (whichever is the higher specification):
Item
Operating system
Processor
Memory
Free disk space
(Note 1)
Ports
Note 1: The PicoScope software does not use all the disk space specified in the table.
The free space is required to make Windows run efficiently.
© Copyright 2008 Pico Technology Ltd. All rights reserved.
USB 1.1
, which turns your PC into a powerful
As required
by Windows
USB 1.1 compliant port
Oscilloscopes are a range of high-speed PC
9
. There is no need for an external power supply
10
PC Oscilloscope
Oscilloscope to operate correctly, you
9
Absolute
Recommended
minimum
Windows XP SP2 or Vista (32-bit versions only)
Introduction
USB 2.0
-capable and
10
.
9
Recommended
minimum
full specification
300 MHz
256 MB
1 GB
USB 2.0 compliant port
1
PicoScope
1 GHz
512 MB
2 GB
ps4000a.en
Advertisement
Table of Contents
