Enter Lock Mode; 3-Way Calling; Call Waiting; 2Sec/Hard Pause - Helio PN-810 User Manual

BASIC OPERATION
I ENTER LOCK MODE
To lock the phone, slide the phone open, press and
hold .
To unlock the phone, press any function key
(Except , numeric key,
password.
I 3-WAY CALLING
With 3-Way Calling, you can talk to two people at the same time.
When using this feature, normal airtime rates will apply to the two
calls.
NUMBER NUMBER
Slide the phone open, enter a number you wish to
call and press .
Once you have established the connection, enter
the second number you wish to call and press
When you're connected to the second party,
press again to begin your 3-Way call.
If one of the people you called hangs up during your call,
you and the remaining caller stay connected.
If you initiated the call and are the first to hang up, all
three callers are disconnected.
26
BASIC FUNCTIONS
), then input your
.
BASIC FUNCTIONS
I CALL WAITING
Notifies you of an incoming call when you are already on a call by
sounding a beep tone and displaying the caller's phone number.
To answer another call while on the phone, press
This places the first call on hold. To switch back to the
first caller, press again.
Call Waiting is a system dependent feature. Please contact
your service provider for details.
I 2SEC/HARD PAUSE
Pauses are used for automated systems (i.e., voice mail, calling
cards). Insert a pause after a phone number then enter another
group of numbers. The second set of numbers is dialed
automatically after the pause. This feature is useful for dialing into
systems that require a code.
Select
"2" or "3"
NUMBER
To insert a pause, enter a phone number then
press [MENU]. Select either a "2sec Pause"
("P") or a "Hard Pause" ("W").
Press to dial or
phone number.
Please refer to page 36 for more details about
storing a phone number.
BASIC OPERATION
[SAVE] to store the
.
27