Removing Pro Tools M-Powered - M-Audio Pro Tools M-Powered 7 Quick Start Manual

Configuring I/O Setup
Using the I/O Setup dialog, you can label
Pro Tools input, output, insert, and bus signal
paths. The I/O Setup dialog provides a graphical
representation of the inputs, outputs, and signal
routing of the M-Audio interface.
Pro Tools M-Powered bypasses the M-Audio
mixer that is displayed in the M-Audio Con-
trol Panel. The interface's hardware inputs
and outputs show up directly in Pro Tools
I/O Setup.
Pro Tools M-Powered has default I/O Setup set-
tings that will get you started. Use the I/O Setup
dialog only if you want to rename the default
I/O paths.
To rename I/O paths in I/O Setup:
Choose Setup > I/O.
1
I/O Setup dialog for Pro Tools M-Powered
(M-Audio FireWire 1814 shown)
Click the Input, Output, Insert, or Bus tab to
2
display the corresponding connections.
To change the name of a path or subpath,
3
double-click directly on the Path Name, type a
new name for the path, and press Enter.
18 Pro Tools M-Powered Getting Started
Click OK.
4
T
See the Pro Tools Reference Guide (or choose
Help > Pro Tools Reference Guide) for more
information on renaming I/O paths.
MIDI Studio Setup
(Optional)
If you plan to use any MIDI devices with
Pro Tools, configure your MIDI setup with MIDI
Studio Setup. See Appendix A, "Configuring
MIDI Studio Setup (Windows Only)" for details.
Backing Up your System
Configuration
After configuring your system and Pro Tools,
you should save an image of your system drive
using a backup utility such as Norton Ghost. By
doing this, you can quickly restore your system
configuration and settings if you encounter any
problems.
Removing Pro Tools
M-Powered
If you need to remove Pro Tools M-Powered
Software from your computer, you can use the
Add or Remove Programs command.
To remove Pro Tools from your computer:
Choose Start > Control Panel.
1
Launch Add or Remove Programs.
2
From the Currently installed programs list, se-
3
lect Digidesign Pro Tools M-Powered.
Click the Change/Remove button.
4
Follow the on-screen instructions to remove
5
Pro Tools M-Powered.