Harbor Freight Tools 96618 Set Up And Instructions

2-step foot switch

2-STEP FOOT SWITCH

read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANuAl.

this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product's serial number in

the back of the manual near the assembly diagram (or month and year of purchase if

product has no number). Keep this manual and the receipt in a safe and dry place for

future reference.

Model

FOOT SWITCH

Model

SET uP AND INSTruCTIONS

Diagrams within this manual may not be drawn proportion.

Distributed exclusively by Harbor Freight Tools

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

2007 by Harbor Freight Tools

SAVE THIS MANuAl

96618

96619

Table of Contents

Need help?

Do you have a question about the 96618 and is the answer not in the manual?

Page 1 . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353.
Page 2: Save These Instructions
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
Page 3 The Foot Switch is now ready to be used as the tool’s ON/OFF Switch. WArNING for the 96618 Foot Switch! In case of a blown fuse or tripped breaker switch when foot switch is in use, please turn off the foot switch prior to replacing the fuse or resetting the breaker.
Page 4: Operating Instructions
OPErATING INSTruCTIONS The following operating instructions are for the 96618 Foot Switch ONly: Once the 2-Step Foot Switch is properly set-up, use your foot (or hand) to step or press down on the pedal once. remove your foot or hand.

96619