Advertisement
Straps
Slots
1
• Place the quilt, print side up, on a
flat surface.
• Fit the "T" end of each strap on the quilt
through the slots in the supports. Pull up
on the quilt to be sure it is secure.
Overhead Gym
Quilt
Supports
Straps
2
• Locate both straps on the bottom of one
of the tubes.
• Fit the ends of each strap into the
support post.
• Turn the support over and fasten
the straps.
• Repeat this procedure to attach the
remaining tube ends to the supports.
3
Support
Straps
Tubes
Advertisement
