Advertisement
Quick Links
™
Infant-to-Toddler Rocker
Toddler Seat
Infant Seat
Model Number: G5911
WARNING
IMPORTANT! KEEP INSTRUCTIONS
FOR FUTURE REFERENCE.
Please keep this instruction sheet, as it contains important information.
Use the upright position only when your child has developed enough upper body control to sit without leaning forward.
Always use the restraint until your child is able to climb in and out of the chair unassisted.
Adult assembly is required. Tool needed for assembly: Phillips Screwdriver (not included).
Requires one LR20 "D" alkaline battery (not included) for vibrations unit operation.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fisher-Price LEARNING PATTERNS G5911
Summary of Contents for Fisher-Price LEARNING PATTERNS G5911
- Page 1 ™ Infant-to-Toddler Rocker Toddler Seat Infant Seat Model Number: G5911 WARNING IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. Please keep this instruction sheet, as it contains important information. Use the upright position only when your child has developed enough upper body control to sit without leaning forward. Always use the restraint until your child is able to climb in and out of the chair unassisted.
-
Page 2: Consumer Information
Warning WARNING To prevent serious injury or death: • It is dangerous to use this product on an elevated surface. • Never use on a soft surface (bed, sofa, cushion) since product can tip over and cause suffocation in soft surfaces. •... - Page 3 Assembly IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. CAUTION This package contains small parts in its unassembled state.
- Page 4 Assembly Side Rail Hole Front Tube Vibrations Unit • Locate the hole in each side rail. • With the vibrations unit facing forward, fit the front tube to the side rails, as shown. Hold the front tube in place and proceed to step 5. Side Rail Front Tube...
- Page 5 Assembly Retainer with Lock Nut • Fit a retainer with lock nut onto the end of the screw and to the inside of a side rail. Hint: A lock nut has been factory assembled to the retainer. During shipment, the lock nut may have fallen out of the retainer.
- Page 6 Assembly • Turn the assembly upright. • Fit the upper pocket on the pad onto the seat back tube. • Fasten the pad buckles around each side rail. Pad Slot Seat Back Tube Hardboard Side Rail • Turn the hardboard over and insert it into the slot in the front edge of the pad.
-
Page 7: Battery Installation
Battery Installation • Locate the battery compartment on the bottom of the vibrations unit. • Loosen the screw in the battery compartment door with a Phillips screwdriver. • Lift to remove the battery compartment door. • Insert one LR20 "D" alkaline battery as indicated inside the battery compartment. -
Page 8: Setup And Use
Set-Up & Use IMPORTANT! Before each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. WARNING To prevent serious injury or death: Use the upright position only when child... - Page 9 Securing Your Infant Anchored End Free End Tighten To tighten the belts: • Feed the anchored end of the restraint belt up through the buckle to form a loop • Pull the free end of the restraint belt • Repeat this procedure to tighten the other restraint belt. To loosen the belts: •...
- Page 10 Toy Bar Toy Bar Plug Toys • Fit the plugs on each end of the toy bar into the sockets in each side rail. • Fit the toy bar straps through the slot in the toy rings. Fasten the straps. •...
- Page 11 Kickstand • Rotate the kickstand out. • Push down on the seat bottom to be sure the kickstand is in position. Storing the Restraint System for Toddler Use Small Slot Kickstand • Insert the restraint belts back through the small slots in the pad.
- Page 12 Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A. ©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Need help?
Do you have a question about the LEARNING PATTERNS G5911 and is the answer not in the manual?
Questions and answers