Know Your Lawn Mower - Yard Machines Series 080 Operator's Manual

Removing
Chute Retainer (Models080 Series)
The chute deflector on your mower is held in an upright
position by a retainer for shipping purposes only.
Remove the retainer, following steps below, before
running the mower for the first time.
Push the chute deflector up and towards the
engine. Holding the deflector in this position,
remove the retainer. See Figure 5.
Lower the chute deflector carefully to its operating
position keeping your fingers out of the way.
Deflector
Retainer
Figure 5
WARNING: The chute retainer must be
removed and discarded before operating
the mower.
InstallingMulching Baffle (Model 080 Series)
If your mower is equipped with the optional mulching
baffle, install itfollowing these instructions:
Lift up side discharge chute and insert the mulching
baffle so that the notches at the bottom of the baffle
sit firmly on the lip of the deck opening. See Figure
6.
Snap the hooks of the baffle over the hinge pin on
the discharge chute. Make sure that the hooks
snaps into place, locking the mulching baffle firmly
onto the mower.
Release the side discharge chute.
InstallingSide DischargeChute (Model 090 Series)
If your mower is equipped with the optional side
discharge chute, install it following these instructions:
Slide the hooks of the side discharge chute over the
hinge pin on the mulching baffle. Make sure that the
hooks snaps into place, locking the chute firmly
onto the mower. See Figure 7.
Release the mulching baffle.
Mulching
Baffle
Hook H =ge
Insert Notches Pin
on Top of Lip
Figure 6
Chute
Side Discharge Hooks
Chute
Figure 7
SECTION 4: KNOW YOUR LAWNMOWER
Read this operator's manual and safety rules before
operating your lawn mower. Compare the illustration in
Figure 8 with your lawn mower to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
,_IL WARNING: The operation of any lawn
mower can result in foreign objects being
thrown into the operator's eyes and
causing severe eye damage. Always wear safety
glasses while operating the mower, or while
performing any adjustments or repairs on it.
BladeControlHandle
The blade control handle is located on the upper handle
of the mower. The blade control handle must be
depressed in order to operate the unit. Release blade
control handle to stop engine and blade. See Figure 8.
WARNING: This blade control mechanism
is a safety device. Never attempt to bypass
its operations.