Craftsman 247.38520 Operator's Manual page 11

.
Followthe stepsbelowto completehandleassembly:
A. Pull upwardon the handle untilholesin lowerhandle (shown
in Figure3 deck cutaway)line up with holesin handle
bracket.See Figure4.
NOTE:Whenpullingupwardon handle,makesureto not pull handle
all the way out.
B. Insertthe T-boltsremovedin stepearlier throughthe handle
bracketsand lowerhandleand tightensecurelyto securethe
handlein place.See Figure4.
C. Reattachwing nutsand carriagebolts removedearlierinto
lowerholesof handleas shownin Figure5.
4. The ropeguide is attachedto the right sideof the upper handle.
Loosenthe wingknobwhich securesthe rope guide.Referto
Figure6.
A. Holdblade controlagainstupperhandle.
B. Slowlypull starterrope handlefrom engineand slip starter
rope intothe rope guide.See Figure6.
C. Tightenropeguide wing knob.
D. Use cableties to securecableto lowerhandle.
Figure5
f
',_. J
Figure4
Figure6
11