Do you have a question about the MJ 9200D and is the answer not in the manual?
Questions and answers
Suzette
March 22, 2025
Hello, I’m trying to get the dryer to start but it won’t, it’s plugged in all the way, the on and off button is engaged, the power light is on indicating that it’s on but it still won’t turn on.
1 comments:
Mr. Anderson
March 22, 2025
If the Majestic Appliances MJ 9200D dryer won't start despite being plugged in and the power light being on, check the following: - Ensure the dryer door is closed tightly. - Verify that the ON/OFF button has been pressed.
If these conditions are not met, the dryer may not start.
Summary of Contents for Majestic Appliances MJ 9200D
Page 1
liances M___ajesti Ap MATTERS WHERE SERVICE _j j parate/Stacking ryer Revision Date 1 I / t/03...
Page 2
WARNING- To reduce the risk of fire, electric shocks, or injury to persons when using your appliance, follow the basic precautions, including the following: 1., Read all instructions before using the appliance. 2. Do not dry articles that have been previously cleaned in, washed in, or spotted with gasoline, dry-cleaning...
Page 3
Congratulations. Welcome to the growing family' of Majestic TMAppliance owners. By choosing a Majestic Appliances model as your laundry appliance you not only found the best in reliable technology, but above all you have found a faithful and untiring convenience appliance.
Page 4
Table of Contents Page 5 "n "n s ready insta your appJiance U.packing, inspecting, Electricity, Closets/Alcoves, Plumbi.g, Venti.g Selecting ry cycles Page Drying Controms, Cottons, Synthetics/ DeNicates, Wool Page °ntenance Page t 0 Water, exterior, interier, winterizing_ detergent, pump, technica! specifica= tions, Obtaining...
Page 5
m nstalt ing/Re ovi ng ett o your Unpack_ng_ inspecting, Emectricity, ing, Venting Unpacking ° Check the packing box for external damage It is your responsibility to register any damage with the freight company delivering the product, " Remove the strapping, then slide the cardboard surround off the machine move the foam protecting material and the plastic bag "...
Page 6
instal1 y@ur Electricity Make sure the voltage and frequency available correspond with the values stated on the data plate located at the back of the machine and that the efectdc system is dimensioned to withstand the maximum current shown on the data plate If the socket the machine is connected to does not correspond with the plug, replace the outlet with a suitable one arid avoid using adapters or shunts since they could cause over heating and burn out Grounding...
Bnsta|ling/Removin install Gettin things ready your appliance Alternate Installations Stacking Installations • When installing the appliance in a configuration where washers and dryers are stacked vertically, there are several methods that have proven successful Clearance Considerations Option I - 3 inch clearance all around the machine Which allows for adequate air flow for the dryer Option 2 - If zero clearance on the sides then installer must allow for a minimum of t inch at the rear of the unit and a minimum of 1 inch clear space on the top of the dryer to allow for air movement to the back of the dryer addition, in an enciosed installation installer must provide a air intake area of no less than t2 sq in of un_obstructed...
Page 8
Drying ryer Drying Confreres, Cottens, Synthetics/Delicates, Wool Drying Controls Drying Automatically If you are drying cottons (blue) or synthetics (Green), the dryer needs to be set using the ap-. propriate drying setting,, Remember that the temperature for cottons (blue) is higher than the temperature for synthetics (green).
Page 9
Drying Selecti Drying Controls, Cottons, Synthetics/Delicates, Wool to select correct drying function? 1. Make sure the weight or volume of clothes is correct. The maximum load your dryer machine can dry depends on the type of fabrics in the load. Use the following table for a guide: Heavy Cotton - maximum...
Page 10
Even though your dryer has been carefully designed and constructed, something may stit] go amiss with your machine Before rushing to technician, please check that the operations listed below have been carried out In many cases you wilt save time, money and a bother Our statistics show that many cafls made to our service representatives could have been solved with a little more attentions to these basic operations_ The dryer won't start...
Owner Care Maintenance Tips exterior, interior, ducts, technical specifications Exterior Keeping the exterior of the unit clean will preserve the value of your investment, Use a soft cloth and liquid cleanser to clean and maintain the exterior interior Do not use solvents to clean the machine Ducts Ducting for exhaust performs best when it is as short and straight as possible It is also advisable to have ducting slope...
Warranty Your Majestic Appliance is warranty for 1 full year from the original purchase on the mechanical parts only when installed in accordance with the instructions in the manual. It is the option of the fac- tory to replace or repair any part which become defective in workmanship or material under normal personal,...
Page 13
Owner Care Access " You have a broad selection of installation owner accesssories available. Just ask your local dealer or give us a call. PN 17-1051 Dryer Vent Kit includes: ._:_ P ipe and Collar Louvered Vent Hood ,,,,,, UL Listed Transition Duct PN 17-1052 Econo Outside...
Need help?
Do you have a question about the MJ 9200D and is the answer not in the manual?
Questions and answers
Hello, I’m trying to get the dryer to start but it won’t, it’s plugged in all the way, the on and off button is engaged, the power light is on indicating that it’s on but it still won’t turn on.
If the Majestic Appliances MJ 9200D dryer won't start despite being plugged in and the power light being on, check the following:
- Ensure the dryer door is closed tightly.
- Verify that the ON/OFF button has been pressed.
If these conditions are not met, the dryer may not start.
This answer is automatically generated