Advertisement
please
make these simple
checks before calling for ser-
vice. These tips can save you
time and money since charges for
TV installation and adjustment of
customer controls are not cov-
ered under your warranty.
No Power
No Sound
Rem
Wor____k
TV Displays Wron2
Channel or No
Chann ! Abov
13
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.
Regularly alternate the use of such video sources with normal 'IV viewing.
i Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
]
outlet and push POWER button again.
I
Check to be sure outlet is not on a wall switch,
• Check antenna connections. Are they properly secured to the TV's ANT/CABLE plug ?_
• Check the TUNING ANTENNA/CABLE control for correct position.
I
• Check INPUT control for correct position. The EXT 1 position without a signal
source will result in a blank screen.
]_
heck the VOLUME buttons.
Check VOLUME LIMIT control.
Check the MUTE button on the remote control.
If attempting auxiliary equipment hook-ups, check audio jack connections.
I
Check batteries. Replace with AAA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
Clean the remote and the remote sensor window on the 'IV.
Check the TV power cord. Unplug the 'IV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again.
Check to be sure TV outlet is not on a wall switch.
Repeat channel selection.
]
Add desired channel numbers (CHANNEL EDIT control) into "IV memory.
Check TUNING ANTENNA/CABLE control for correct position.
This TV is equipped with protective circuitry that shuts the 'IV off in case of moderate
power surges. Should this occur turn the TV back on by pressing the POWER button
once or twice, or unplug (wait 10 seconds) and then replug the power cord at the AC
Ioutlet. This feature is NOT designed to prevent damage due to high power surges such
as those caused by lightning, which is not covered by your warranty.
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean
dry cloth to dry the wiped surfaces.
• Occasionally vacuum the ventilation holes or slots in the cabinet back.
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
19
Advertisement
