Advertisement
w
ow that you have looked up
the two-da'git Remote Code
Number for your brand of Cable
Converter (on previous page),
you are ready to follow the four
simple steps below.
Please read through steps 1-4
before beginning.
_,[_
Press and release the REC
(RECORr)) button.
_.'_
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
_.'_,)
Within thirty seconds after
releasing the CBL System
button, ENTER THE TWO
DIGIT CODE NUMBER for
the desired Convener. The
remote is :now ready to send
commands to the Converter.
_
Point
the remote
at the
Convener.
Press the POWER
button
on the remote to turn the
Convener
ON.
Try it out. The Channel
and POWER buttons on the
remote should now operate the
Convener.
Remember, if this doesn't work
the first time, repeat steps using
the same remote code number.
If after a second try the remote
does not operate your Convener,
and there are more code numbers
listed for your brand Converter,
use the next listed code number.
If after repeated attempts the code
number method does not work
your Convener, try the
"CONVERTER SEARCH"
method on page 30.
Cable Converter
I
1
PAUSEII
(ON/OFFX
mSX SWAP
)(FRE_Z_)
29
Advertisement
