Advertisement
C2
Auto-Programming
(see
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels,from
the list of
channels in the TV's memory.
<_
Select CHANNEL MEMORY
(ADD/DELETE
CHANNELS)
control.
With the FEATURES MENU on
screen, move the RED=highlight
with the MENU (M) 4$_buttons.
Then press the MENU button.
_' '_ Press the CHANNEL AV or
number buttons to select the
channel you want to add or delete.
<_
Press the MENU • button to
ADD the channel into the TV's
memory.
Press the MENU '41 button to
DELETE the channel from
memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
_
Pl'ess the STATUS or MENU
I button to clear the screen when
through.
0
Remember. You can also
add the AUX 1, AUX 2, or
AUX 3 modes just like a channel.
Then by pressing the CHANNEL
&V buttons the AUX(iliary)
mode can quickly be selected to
use the desired set of Input jacks
on the TV (see page 30).
Note: AUX 1, AUX 2, and AUX 3
modes are located between the
lowest and highest channel
numbers within the
ADD/DELETE
CHANNEL
control screen.
FEATURE MENU
CHANNEL MEMCRY
SELECT _L
(_O
to OELE'_ CHANNEL
_)
for ANT B
(_
when FINISHED
NOTE: A separate ADD/DELETE CHANNEL memo_
ma T also be created for the ANT(crma) B Input on the
rear of the set (if _ Anterma or Cable TV signal has been
connected). Just press the _
button on the remote,
while in the ADD/DELETE CHANNEL mode, to switch
between the ANT A and ANT S charnel memory lists.
Then follow steps 2 and 3 as shown to the left to add or
delete the desired channels,
14
Advertisement
