Advertisement
Nth
w that you have looked up
e two-digit Remote Code
Numbei for your brand of Cable
Converter ( o_n pievious page),
you are ready to follow the four
simple steps below.
Please read through steps 1-4
before beginning.
_
Press and release the REC
I (RECORD) button.
<_
Within thirty seconds after
releasing the REC button, press
and release the CBL System
button.
Within thirty seconds after
releasing the CBL System
button, ENTER THE TWO
DIGIT CODE NUMBER for
the desired Converter. The
remote is now ready to send
commands to the Converter.
Point the remote at the
Converter. Press the POWER
button on the remote to turn the
Converter ON.
O
Try it out. The Channel
and POWER buttons on the
remote should now operate the
Converter.
Remember, if this doesn't work
the first time, repeat steps using
the same remote code number.
If after a second try the remote
does not operate your Converter,
and there are more code numbers
listed for your brand Converter,
use the next listed c_umber.
If after repeated attempts the code
number method does not work
your Converter, try the
"CONVERTER SEARCH"
method on page 42.
Cable Converter
STOpn
(ooo/ofFmm
ms [] SWAP [] n_rn }
PlP_
41
Advertisement
