Advertisement
The TV's Audio/Video Input jacks
are for direct picture and sound
connections between the TV and
a VCR (or similar device) that
has Audio/Video Output jacks.
<_
Connect the VIDEO (yellow)
CABLE to the VIDEO IN jack
on the back of the TV. Then con-
nect the AUDIO (red and white)
CABLES to the AUDIO (left and
right) IN jacks on the rear of the
TV.
<_
Connect the VIDEO (yellow)
CABLE to the VIDEO OUT jack
on the back of the VCR. Then
connect the AUDIO (red and
white) CABLES to the AUDIO
(left and right) OUT jacks on the
rear of the VCR.
<_
Turn the VCR and the TV
l ON.
<_
Press the MENU button on
the remote to display the
onscreen menu.
<_
Press the CURSOR UP • or
CURSOR DOWN • buttons
until the word INPUT is high-
lighted.
<_
Press the CURSOR RIGHT
• or CURSOR LEVI" .,4 button
to display the picture/sound menu
(ANTENNA, EXT 1). Use the
CURSOR UP • or DOWN •
buttons to select.
Now your ready to place a prere-
corded video tape in the VCR and
press the PLAY • button.
O
q
BACK OF TV
IF YOU ARE USING A
MONO DEVICE, USE
ONLY THE AUDIO
L/MONO
JACK. IF A
DUMMY JACK IS
PLUGGED INTO THE
AUDIO R, NO SOUND
WILL BE HEARD,
SOUND
AVL
1INPUT
SLEEPTIMER
SmartLock
S_REO
ON
OFF
-d
®@@
®®®
® ®
VIDEO IN
(YELLOW)
VCR
(EQUIPPED
WITH
VIDEO AND AUDIO
OUTPUT JACKS)
32
Advertisement
