Sears 934.53735190 series Owner's Manual page 21

• MANUAL FOCUSING
1. Set "FOCUS AUTO/MAN" Switch to "MAN"
position,
2. Zoom in on the object by pressing the Power Zoom
Switch on the "'T'" side,
NOTE: See page 21 for "POWER ZOOM".
Power Zoom Switch
"FOCUS AUTO/MAN" Switch
Far Object
Zoom In
3. Focus on the object by turning the Focus Ring.
NOTE: If focusing is performed without zooming up
first, the picture may become out of focus when the
zoom-in is done during actual picture taking.
4. Then, zoom out from the object as desired.
Focus Ring
Focused
Zoom Out
NOTES:
• The Auto focusing will not function if the lens
is left in macro mode.
• Auto-Focus will not operate properly when the
Telephoto or Wide-angle lens is attached to the
Video Camera/Recorder.
2O