GE AG_07 Series Owner's Manual And Installation Instructions page 12

Window Installation Instructions
Install the Case in the Window
_] Open the _indow and matk the (enterline of
tile window stool.
[_ ( aveflflly place the case on the window stool
and align the center mark on the bottom fiont
with the centerline of the stool.
[_ Pull the window dox_albehind the top
mounting rail.
/VOTE: Donotshut thewindowso tigh@that movement of
theaccordion panelsisrestricted
[_ I,oosely assemble the sill supports.
INDOOR OUTDOOR
Sill support
[_] Select the position that will place the sill
supports neat the outerlnost point on the sill.
Attach the sill supports to the case track hole in
relation to the selected position using 2 type A
screws in each support.
[_ A({just the boh and the nut in each support so
that the case is installed with a slight downward
tilt (about 1/4") towatd the outside,
[_] Se(ure the (ase to the window stool bv using
3 type B screws.
[_] Pull the accordion panels to each x6ndow
sash tra(k. Attach them on eaOl side to the
xdndow sash and the xxdndow stool using
4 type ( s(rews.
Frameguide
72