GE AG_07 Series Owner's Manual And Installation Instructions page 10

Window Installation Instructions
Read completely, then follow step-by-step.
Window Requirements
_; These instructions are ti)r a standard (h)uble-
hung _dndow. Y()u _dll need to modi_" them ti)r
other/ypes ofldndows.
iJ_i:_ The air conditioner can be installed without
the accorcfion panels if needed to fit in a narrow
_dnd()w. See the _dndow opening (fimensions
below.
7,000 and 8,000 BTU models
D===_
14" rain.
22" to 36"
(Withaccordion panels)
,11
183/4 " min.
(Withoutaccordion panels)
-z/
J
All supporting parts must be secured to firm
U,X)O(I, IllasonI) 7 oi"
i]letal.
ij_::: The electrical outlet must be within reach of din
power cord.
10,000 and 12,000 BTU models
l J
D===_
16" min.
91 27" to 39"
(Withaccordion panels)
23V8"rain.
{Withoutaccordionpanels)
Storm Window Requirements
A storm window flame will not allow the air
concfitioner to tilt tow, uds the outside and will keep
it fl'om (haining properly. To at!just ti)r this, attach
a piece of wood to the stool.
/ Wood
1/2"higher
thanframe
t Stool
Stormwindow
frame
WOODPIECES--
WIDTH:2"
LENGTH: Long enough to fit inside the window
fiame.
THICKNES&Todetermine
the thickness, place a
pie(e of wood on the stool to make it 1/2" higher
than the top of the storm _dndow fiame.
Attach securelyxddl nails or screwsprovided by
tlle installer.
10