GE Profile DPSE810 Owner's Manual page 7

About the control panel-for model DPSR610.
ge.com
• Clean lint filter • Add clothes
Step 2 Step 3 Step 4
• Select Dry Cycle
• Shut door
• Push START
NOTE: When making a selection with any knob, simpl_l point the knob an_lwhere within the shaded range
for that setting.
Model DPSR6]O
SIGNAL TEMPERATURE WRINKLE CARE
START
0
About the control settings.
End of Cycle Signal
This signal will sound at the end of the cycle to remind Uou to remove the clothes.
NOTE:
• Remove garments promptly at the sound of signal. Place clothes on hangers so wrinkles won't set in.
• Use the END OF CYCLESIGNAL especially when drying fabrics like pol_jester knits and permanent press.
These fabrics should be removed so wrinkles won't set in.