Amana R-410A User's Information Manual
Amana R-410A User's Information Manual

Amana R-410A User's Information Manual

Amana r-410a remote outdoor unit user's information manual

Advertisement

Thank you for investing in our quality Comfort System. The air conditioner you
have purchased is part of a Split System and has both indoor and outdoor
components. With proper installation and maintenance, it should provide you
with years of dependable service.
Take time to familiarize yourself with the information concerning unit features,
operation, and maintenance contained within this manual.
Check the serial plate for model identification. Record this information on the
last page of this booklet.
Please read this User's Manual carefully, and follow the instructions given.
Keep it in a safe place for future reference.
Your warranty certificate is supplied with this unit. Read it carefully and note
what is covered. Keep it and a copy of the bill received from your dealer in a
safe place for future reference. This can serve as proof of the date of installa-
tion.
Part No. 10659207
Printed in USA
R-410A R
USER'S INFORMATION MANUAL
is a trademark of Maytag Corporation and is used
®
under license to Goodman Company, L.P. All rights reserved.
Goodman Company, L.P.
1810 Wilson Parkway • Fayetteville, Tennessee 37334
www.amana-hac.com
O
EMOTE
UTDOOR
C
R
U
NIT
R
2003-2004 Goodman Company, L.P.
Effective: June 2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R-410A and is the answer not in the manual?

Questions and answers

Summary of Contents for Amana R-410A

  • Page 1 R-410A R Thank you for investing in our quality Comfort System. The air conditioner you have purchased is part of a Split System and has both indoor and outdoor components. With proper installation and maintenance, it should provide you with years of dependable service.
  • Page 2: Table Of Contents

    ATTENTION INSTALLING PERSONNEL As a professional installer you have an obligation to know the product better than the customer. This includes all safety precautions and related items. Prior to actual installation, thoroughly familiarize yourself with this Manual. Pay special attention to all safety warnings.
  • Page 3: Typical Thermostat Operation

    Typical Thermostat Operation Your thermostat is the control center for your Split System. It is very important that the thermostat be located where it can best “sense” the average room temperature. It must not be located where it is exposed to hot or cold drafts or to hot or cold spots on the wall, such as those received from outside walls, walls with pipes inside, or from openings into the attic.
  • Page 4 Typical Thermostat Operation CAUTION Do not exceed the set point limits preset at the factory. As shipped from the factory, your comfort system is designed to provide cooling only when the outdoor temperature is 55°F or higher. Exceeding these limits may result in severe equipment damage.
  • Page 5: General Information

    It is classified as an HFC (Hydrofluorocarbon). The EPA has approved R-410A under its Significant Alternative Policy (SNAP) guidelines. R-410A is envi- ronmentally “friendly” as it does not harm the ozone layer in the atmosphere.
  • Page 6: Annual Maintenance

    Annual Maintenance We strongly recommends your unit be given an annual maintenance checkup by a qualified servicer. Your unit should be inspected by a qualified installer or service agency at least twice a year. This check should be performed before the heating and cooling seasons begin.
  • Page 7: Before Calling Your Servicer

    Before Calling Your Servicer There are several built-in safety features that may automatically shut off the unit under abnormal operating condi- tions. If your system does not operate normally, take time to perform the following checks before requesting service. A couple of simple checks may allow you to avoid a service call. If the following steps do not resolve the problem, contact a qualified servicer for further troubleshooting and/or repairs.
  • Page 8: Safety Labels

    NOTE: If safety labels are missing or illegible, contact the installing dealer or our Customer Service Department for ordering information. WARNING HAZARDOUS MOVING PARTS Fan blades may start rotating automatically. Do not apply power to this appliance or compressor if the compressor terminal cover has been removed or is not firmly in place.
  • Page 9: Any Questions

    Most questions can be answered by your local dealer. If you need further information regarding the operation, maintenance, or service of your unit, contact your dealer. If you have other matters that cannot be resolved locally, or you need additional information regarding other heating and cooling products offered by us - please call: Any Questions? CONSUMER INFORMATION LINE...
  • Page 10: Model Information

    Please write the Model number, Manufacturing number, and Serial number of your unit. MODEL SERIAL# Record installer information below: Installing Company: _____________________________ Telephone Number: _____________________________ Installation Date: _______________________________ Space has been provided below to record the Model, Manufacturing, and Serial numbers of the indoor air handler, “A”...

Table of Contents

Save PDF