First Alert SC05B Specification Sheet

SMOKE & CO
C O M B O
A L A R M
P H O T O E L E C T R I C
SCO5B Series
CAT.
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
OPTIPATH 360
TECHNOLOGY
Provides 360 degrees of direct access
to the smoke sensing chamber.
SWEEPING
HORN TONE
Varying horn tone makes it easier for elderly
with normal age related hearing loss to hear
the alarm.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel
applications.
Two AA Battery Powered
First Alert Model SCO5 is a battery operated single station photoelectric smoke
and carbon monoxide combination alarm specifically designed for residential and
institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily dwellings as defined in standard NFPA 101.
Model SCO5 has been fully tested and complies with, UL217, UL2034, CSFM,
NFPA 72, and NFPA 101 and other agencies that model their codes after the
above agencies. It meets building codes where battery operated photoelectric
smoke and carbon monoxide combination alarms are required and with model
building codes published by the ICC.
First Alert Model SCO5 is a state of the art smoke and CO combination alarm
designed to provide early warning of a fire or carbon monoxide danger. It
TM
features a photoelectric smoke sensing chamber and an electrochemical CO
sensor. It features a Sweeping Horn Tone that has a lower and varying frequency
that makes it easier for the elderly with normal age related hearing loss to hear
the horn. Two AA alkaline batteries power supply and a single button test/silence.
This alarm has two silence features. Low Battery Silence: Temporarily silence the
low battery chirp for up to eight hours. Alarm Silence: Silence alarm for several
minutes. Optipath 360 technology
smoke sensing chamber. It also features tamper resistant locking pins that lock
the alarm to the mounting bracket and/or the battery drawer to prevent removal
of battery. Battery installation and removal can occur while the unit is mounted
to the ceiling or wall via the slide out battery drawer. Designed for wall or ceiling
mounting. Includes mounting anchors
and screws.
provides 360 degrees of direct access to the
TM