Wireless Lan - Panasonic TH-42PF50U Operating Instructions Manual

Network Setup

WIRELESS LAN

You can make detailed wireless LAN settings.
You can con¿ gure settings when the wireless module (ET-WM200U) is mounted.
Setting network number
1
Select [WIRELESS LAN] in [NETWORK SETUP] menu and press
2
Select the number to be connected for
[WIRELESS LAN].
•
[OFF], [S-MAP], [1]-[4], [USER1]-[USER3]
•
Selecting [OFF] disables the wireless LAN.
•
Network number: [S-MAP] and [1]-[4] are available only when connecting via wireless LAN with the application
software the "Wireless Manager mobile edition 5.5". [S-MAP] is for showing connectable displays on the network
according to their levels of radio wave intensity. For details, refer to the operation manual of the "Wireless
Manager mobile edition 5.5".
USER settings
You can con¿ gure more precise network settings, if you select from [USER1] to [USER3] (user) for [WIRELESS LAN].
1
Select [USER1] – [USER3] for [WIRELESS LAN].
WIRELESS LAN
SAVE
WIRELESS LAN
NAME CHANGE
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
SSID
MODE
2
Set [DHCP].
When "OFF" is selected, IP ADDRESS and other settings can be set manually.
NAME CHANGE
DHCP
(DHCP client function)
IP ADDRESS
(Display of IP address and setting)
SUBNET MASK
(Displaying and setting the subnet
mask)
GATEWAY
(Display of gateway address and
setting)
•
If [DHCP] is set to [ON], the IP address and other items are not displayed. Check the [STATUS] page for the
current IP address and other items. (See page 17)
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
Address settings
1
USER1
2
OFF
3
192.168. 10. 100
4
255.255.255. 0
192.168. 0. 1
Pressing
AD HOC
You can change the user name. Entering characters
ON: If a DHCP server exists in the network to which the display is
connected, the IP address will automatically be acquired.
OFF: If a DHCP server does not exist in the network to which
the display is connected, additionally set [IP ADDRESS],
[SUBNET MASK] and [DEFAULT GATEWAY].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
WIRELESS LAN
SAVE
WIRELESS LAN
Select the item and press
IP ADDRESS
I
192.168. 0. 8
Use to select a digit.
Use to change a number.
Press .
will cancel the address change.
button.
OFF
.
page 14
11