Philips Songbird - Philips GoGEAR SA4DOT02 User Manual

6 Update the
firmware
through Philips
Songbird
SOUNDDOT is controlled by an internal
have purchased SOUNDDOT.
Through Philips Songbird, you can check for
over the Internet.
Tip
1
Make sure that you have connected your
PCto the Internet.
2
Connect SOUNDDOT to the PC.
3
On the PC, launch Philips Songbird.
If necessary, click Start > Programs >
Philips > Philips Songbird.
4
Click SOUNDDOT in the Player pane.
Then, select Tools > Check for updated
in the pop-up window.
» Philips Songbird checks for updates
from the Internet.
14 EN
SOUNDDOT
5
Follow the onscreen instructions.
» Downloading and installation of
» The SOUNDDOT restarts after the
use again.
Note
Wait until the update is completed, then disconnect the
SOUNDDOT from the computer.