Page 1
Type 508 ISSUE 1 Downloaded from: http://www.guardianalarms.net...
Page 2
Locking nut Fig.2 Method The type 508 housing comes packed in the orientation shown in (fig.1) To bring the 508 into operational service follow the following procedure. 1. Using the spanner (supplied) loosen the locking nut. 2. Rotate the extruded bracket arm and cast base through 180°...
List of contents Before installation please remove the components from the packaging and check that all items listed below have been supplied. A. 1 x Type 508 housing G. 1 x Insulating Pad B. 1 x Type 508 Handbook H. 1 x Screw Insulator C.
Circuit Diagram Unit fitted with a 20 x 5mm 1 Amp fuse as standard. It is the customers responsibility to change the fuse to suit their own application. 508 operation manual Sheet. 3...
Operation Body Camera Platform locates in the middle slots only Arrow ’ ‘A Suspension Platform Hook Bracket View on Arrow ‘A’ Body Hook Platform Body Suspension Hook Platform Bracket To gain access to the 508 housing the following procedure should be fol- lowed.
Mounting Instructions 1.(2 x M6 x40 Soc. Cap hd screws) 180° 4 x M6 x 16 Soc. Hd. Screws Ceiling mounted configuration Arrow ‘A’ 2 x M6 Grub Screws View on arrow ‘A’ Housing body & M20 Cable Gland sunsheild Wall mounted configuration Remove 4 x M6 x 16 Soc.
Need help?
Do you have a question about the Type 508 and is the answer not in the manual?
Questions and answers