Introduction; Symbols - Milwaukee 2205-20 Repair Service Instructions

Introduction

To avoid shock or injury, do not perform the verification tests or calibration procedures
described in the manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
The 2205-20 contain parts that can be damaged by static discharge.
Follow the standard practices for handling static sensitive devices.
Precautions and Safety Information
Use the Meter only as described in the Operator's Manual. If you do not do so, the protection provided
by the Meter may be impaired. Read the "Safety Information" page before servicing this product.
In this manual, a
CAUTION identifies conditions and actions that may damage the Meter or the test instruments.
The Symbols
The symbols used on the Meter and in this manual are explained in Table 1.
Table A. The Symbols
WARNING identifies conditions and actions that pose hazard (s) to the user; a
Risk of electric shock
See instruction card
DC measurement
Equipment protected by double or
reinforced insulation
Battery
+ +
Earth
AC measurement
Conforms to EU directives
Application around and removal from hazardous
live conductors is permitted.
Do not discard this product or throw away.
WARNING
CAUTION
1