Table of Contents
Advertisement
Operation
Models with radio frequency controls
The operating state is shown by the
Standby indicator on the vacuum.
The vacuum can be switched to a
standby mode during pauses.
^ Press the Standby button on the
handpiece.
To turn the vacuum on again:
^ Press the Standby button on the
handpiece. The vacuum cleaner
turns on to the last selected power
level.
^ Press – to turn the vacuum cleaner
on at the lowest power level.
^ Press + to turn the vacuum cleaner
on at the highest power level.
Every push of a button on the radio
handpiece is displayed by the indicator
light.
The vacuum can still be used if the
battery in the radio handpiece is
weak or not inserted at all.
^ Turn the vacuum on with the foot
switch.
^ Press the Reset button.
The vacuum will operate continuously
on the maximum suction power.
^ Turn the vacuum off with the foot
switch.
Only use the Standby mode for
short pauses during vacuuming. Do
not leave the vacuum in Standby
mode, there is a danger of
overheating and damage.
18
Advertisement
Table of Contents
