Do you have a question about the Public Alert WX-150 and is the answer not in the manual?
Questions and answers
Vicki
April 11, 2025
How to turn off alarms on WX 150
1 comments:
Mr. Anderson
April 11, 2025
To turn off alarms on the First Alert Public Alert WX-150, press and hold the ALARM button for 3 seconds to access the alarm settings. Then cycle through the alarm options using the ALARM button until you reach "ALARM OFF." Press the SAVE button to save and exit to normal operation.
This answer is automatically generated
Subscribe to Our Youtube Channel
Related Manuals for First Alert Public Alert WX-150
TABLE OF CONTENTS IMPORTANT SAFEGUARDS ------------------ ... 3 CARE AND MAINTENANCE ------------------- ... 4 FCC NOTICE TO USERS ---------------------- ... 5 INTRODUCTION --------------------------------- ... 6 MAIN FEATURES --------------------------------- ... 7 LOCATION OF CONTROLS ------------------ ... 8 DESCRIPTION OF CONTROLS -------------- ... 9 MENU TREE ---------------------------------------- ...
-20ºC (-5ºF) or above +60ºC (+140ºF), the display may temporarily cease to function properly, or could result in permanent damage. Contents in this package • One Public Alert Radio – WX-150 • One AC Power Adapter 120VAC: 12VAC • One User’s Manual (this document) 90-Day Limited Warranty Sima Products Corp.
SERVICE PROCEDURE You may be asked to send your unit in for service.It will be necessary to furnish the following in order to have the product serviced and returned. 1. For Warranty Repair, include some form of proof-of-purchase. 2. You must include the Public Alert System Receiver unit and power adapter. 3.
How it works The WX-150 displays NOAA text messages on the LCD screen. When an alert is received, the alert siren sounds and the radio automatically switches to the voice broadcast. Messages are identified by one of three color-coded LED lights as follows: “Advisory”...
ON button. reset weather channel, follow instructions on page 14. 2. Poor reception. Adjust antenna, move radio location. The main features of the WX-150 Public Alert Radio include: NOAA Alert function Your Public Alert Radio will automatically sound an alert tone siren and flash the corresponding LED color indicator when it receives a weather or civil emergency broadcast from NOAA (Weather Band).
Handicapped Accessories - Appendix B The WX-150 Public Alert radio is equipped to connect a variety of special needs accessory devices including strobe lights, pillow vibration modules and remote sirens. Once connected, these devices will automatically be activated when the radio receives an advisory, watch or warning for the duration of the radio siren or until you press the Radio OFF button.
SET CHANNEL Using the Alarm Clock The WX-150 has 2 alarm settings. To set the time refer to the Setting the ALarm Clock section on page 19. To activate the alarms: Press and hold the ALARM button for 3 seconds.
MENU button, your changes will not be saved. Setting the Siren Mode The WX-150 allows you to block the siren from sounding on some warnings that are not relevant to your area. For example, a flood warning that may be issued in your county may not affect your location.
Adding Alerts The WX-150 provides the ability to add up to 4 new alerts. This feature allows you to update your WX-150 in the event that NOAA changes or adds alerts to the message menu in the future. The alerts you add must have the same exact 3 letter code used by NOAA for your radio to respond properly.
LCD screeen will display the default time of 12:00. 3. Setting the Clock and Calendar The WX-150 is equipped with a day, date and time clock as well as a dual alarm clock. To set the day, date and time: Press and hold the menu button for 3 seconds.
MENU button, your changes will not be saved. Setting the Alarm Clock The WX-150 has two wakeup alarms as well as a snooze button to provide maximum control over your alarm clock. The unit will alarm for 59 minutes unless stopped by pressing the SNOOZE or ALARM ON/OFF buttons.
BACKLIGHT menu by pressing the MENU button, your changes will not be saved. You are now ready to use your WX-150. To listen to the weather channel press the LISTEN button. Place the radio where it gets the best reception. To Turn off the weather channel press the LISTEN button again.
4. Weekly and monthly tests are stored in the Alert Queue. Note: If the WX-150 has not received a test signal or an alert for a period of 10 days, it will display 10 DAY ALERT SENTRY on the LCD screen and the amber Advisory LED will blink.Check the SAME location and...
Need help?
Do you have a question about the Public Alert WX-150 and is the answer not in the manual?
Questions and answers
How to turn off alarms on WX 150
To turn off alarms on the First Alert Public Alert WX-150, press and hold the ALARM button for 3 seconds to access the alarm settings. Then cycle through the alarm options using the ALARM button until you reach "ALARM OFF." Press the SAVE button to save and exit to normal operation.
This answer is automatically generated