McIntosh MXA60 60th Anniversary Owner's Manual page 31

91.5 MHz
NO PRESETS AVAILABLE
Figure 59
1. Momentarily press and release the Front Panel
STORE/CLEAR Push-button. The Front Panel
Information Display will indicate "PRESET
1: AVAILABLE", which is the first of 9 Preset
Numbers to be assigned. Refer to figure 60. The
91.5 MHz
PRESET 1: AVAILABLE
Figure 60
Station to be entered into memory may also be
assigned to a different Preset Number (2-9) by
rotating the TUNE (outer knob) Control to select
ST ¦
the desired Preset Number.
Notes: 1. Presets are automatically assigned in
2. To enter the station into memory, press and hold in
the STORE/CLEAR Push-button until the Front
Panel Information Display indicates "PRESET
ST ¦
STORED" then release the STORE/CLEAR Push-
button. Refer to figure 61. The just entered Station
91.5 MHz ST ¦
WWWW-FM JAZZ 91
Figure 47
order from 1 to 9 unless a different Preset
Number is selected.
2. To exit without entering a new Preset into
memory, momentarily press the Front
Panel STORE/CLEAR Push-button.
91.5 MHz ST ¦
PRESET STORED
Figure 61
How to Operate the Tuner, con't
Preset will be assigned Preset Number 1 (or the
Preset number you selected) and is displayed on
the Front Panel Information Display. Refer to
figure 62.
P1 91.5 MHz
Figure 62
3. Assign additional station Presets by performing
steps 1 and 2.
Note: If all 9 Presets are assigned and the STORE/
CLEAR Push-button is pressed, the display
will indicate the station selected for Preset
Number 1. Refer to figure 63.
P9 105.7 MHz
PRESET 1: 91.5 MHz
Figure 63
4. To verify the Station Preset(s) just entered into
memory, rotate the TUNE Control; using the Re-
mote Control press the 9 PSET
Push-buttons to cycle through and confirm your
preset assignments.
Clearing Presets
5. Select the Station Preset to be removed by us-
ing the Front Panel TUNE Control or using the
Remote Control 9 PSET
▼
buttons.
6. Press and hold in the Front Panel STORE/CLEAR
Push-button until the Front Panel Information Dis-
play indicates "PRESET CLEARED" then release
the STORE/CLEAR Push-button. Refer to figure
64 on the next page.
Note: If you wish to replace an already assigned
Station Preset with another radio station, it
ST ¦
ST ¦
or : PSET
▼
p
or : PSET Push-
p
31