LG Chocolate User Manual page 92

Safety
determined at the highest certified
power level, the actual SAR level of the
phone while operating can be well below
the maximum value. Because the phone
is designed to operate at multiple power
levels to use only the power required to
reach the network, in general, the closer
you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for
sale to the public, it must be tested and
certified to the FCC that it does not
exceed the limit established by the
government-adopted requirement for
safe exposure. The tests are performed
in positions and locations (e.g., at the ear
and worn on the body) as required by the
FCC for each model.
The highest SAR value for this model
phone when tested for use at the ear is
0.98 W/kg and when worn on the body,
as described in this user guide, is 1.02
W/kg (body-worn measurements differ
among phone models, depending upon
available accessories and FCC/IC
requirements). While there may be
differences between SAR levels of
92
various phones and at various positions,
they all meet the government
requirement for safe exposure. The FCC
has granted an Equipment Authorization
for this model phone with all reported
SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR
information on this model phone is on file
with the FCC and can be found under the
Display Grant section of
http://www.fcc.gov/oet/fccid after
searching on FCC ID BEJMX800.
Additional information on Specific
Absorption Rates (SAR) can be found on
the Cellular Telecommunications Industry
Association (CTIA) website at
http://www.ctia.org.
* In the United States and Canada, the
SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard
incorporates a substantial margin of
safety to give additional protection for
the public and to account for any
variations in measurements.