LaCie CD-RW USB 2.0 User Manual
LaCie CD-RW USB 2.0 User Manual

LaCie CD-RW USB 2.0 User Manual

Design by f-a-porsche

Advertisement

Quick Links

Register your product online
for free technical support:
www.lacie.com/register.htm
go directly to manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD-RW USB 2.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LaCie CD-RW USB 2.0

  • Page 1 Register your product online for free technical support: www.lacie.com/register.htm go directly to manual...
  • Page 2: Table Of Contents

    Table of Contents page 1 LaCie CD-RW Drive User’s Manual Table of Contents Foreword Precautions 1. Unpacking Your LaCie Drive 1.1. Minimum System Requirements 1.1.1. Hardware Requirements 1.1.2. System Requirements 2. Getting Connected 2.1 Install the Recording Software 2.2 Connect the Power Supply and Switch On the Drive 2.3 Connect the USB 2.0 Cable to the Drive and to Your Computer...
  • Page 3: Foreword

    USB 2.0 Copyrights Copyright © 2003 LaCie. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of LaCie.
  • Page 4 Foreword LaCie CD-RW Drive User’s Manual page 3 USB 2.0 Canada Compliance Statement This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Manufacturer’s Declaration for CE Certification We hereby certify that this device is in compliance with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
  • Page 5: Precautions

    Always follow the basic precautions listed below to use your LaCie drive safely and correctly. Respecting these guidelines will help to avoid the possibility of personal injury to yourself or others, as well as to prevent damage to your device and other computer equipment.
  • Page 6 Precautions LaCie CD-RW Drive User’s Manual page 5 USB 2.0 General Use Precautions: • Do not expose the drive to temperatures outside the range of 5° C to 40° C (41° F to 104° F). Doing so may damage the drive or disfigure its casing.
  • Page 7: Unpacking Your Lacie Drive

    1. Unpacking Your LaCie CD-RW Drive: You’ll tear through your work with your new LaCie CD-RW Drive. Boasting over 485 times the capacity of floppy disks, CD media is the perfect tool for sharing information between different systems. You can create discs full of word documents, spreadsheets, music, pictures and video, and pass them along to any other computer with a CD-ROM drive.
  • Page 8: Getting Connected

    7 USB 2.0 2. Getting Connected Follow these steps to quickly get your LaCie Drive powered on and connected to your computer. Click on a step to get started! 2.1. Install the Recording Software 2.2. Connect the Power Supply and Switch On the Drive 2.3.
  • Page 9: Install The Recording Software

    Step 2.1. – From you LaCie CD Utilities CD-ROM, open the software folders, click on the install icons (Windows Users: click on the Setup.exe icon; Mac Users: double-click the Installer icon) of the various programs and follow the on-screen instructions to install the programs.
  • Page 10: Connect The Power Supply And Switch On The Drive

    LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty.
  • Page 11: Connect The Usb 2.0 Cable To The Drive And To Your Computer

    10 USB 2.0 Step 2.3. – Connect the USB 2.0 cable to your LaCie Drive and to your computer. USB 2.0 Logo USB 1.1 Logo 1) Examine the cable carefully and make sure that you have the USB 2.0 cable properly aligned, then insert the cable firmly into the USB port on the back of the drive for a stable connection.
  • Page 12: Using Your Lacie Drive

    CD-Extra Your new LaCie drive opens up a whole world of possibilities for copying data and audio onto disc. Please be responsible in your use of this technology. Before copying anything onto CD media, make sure you are not violating any copyright laws.
  • Page 13: Inserting Discs

    The power must be on in order to open the drive. The drive must be on a flat surface to work correctly. To close your LaCie CD-RW Drive, press the Open/Close button on the front of the drive. Warning! •...
  • Page 14: Emergency Ejection Of Discs

    Using Your LaCie Drive LaCie CD-RW Drive User’s Manual page 13 USB 2.0 3.4. Emergency Ejection of Discs In the event that a CD cannot be ejected with the Open/Close button and the software is not controlling the drive, use the emergency eject operation to open the disc tray.
  • Page 15: Writing Discs

    Using Your LaCie Drive LaCie CD-RW Drive User’s Manual page 14 USB 2.0 3.6. Writing Discs The following is a brief overview of some of the recording terminology to help you understand how to use your drive to write discs.
  • Page 16: Helpful Information

    To utilize the newly-enhanced USB 2.0 performances, your computer must be equipped with a USB 2.0 host bus adapter card (sold separately, such as the LaCie USB 2.0 PCI Card, or integrated by your PC manufacturer) and the appropriate drivers.
  • Page 17: Disconnecting Usb Devices

    Helpful Information LaCie CD-RW Drive User’s Manual page 16 USB 2.0 4.1.2. Disconnecting USB Devices USB external devices feature "plug & play" connection. This means that your drive can be connected and disconnected while the computer is running. To prevent failures, it is important you follow these steps when disconnecting your USB device.
  • Page 18: Data Transfers

    1) Make sure that the USB cable is connected tightly and securely on both ends of the cable, from the drive to the computer. If you are using a USB cable other than the one supplied with your LaCie drive, check that it is USB 2.0 certified. The cable that is provided with your LaCie drive is USB 2.0 certified.
  • Page 19: Troubleshooting

    5. Troubleshooting In the event that your LaCie CD-RW Drive is not working correctly, please refer to the following checklist to find out where the problem is coming from. If you have gone through all of the points on the checklist and your drive is still not working www.lacie.com...
  • Page 20 If you cannot see the device, recheck the cables and try the other troubleshooting solutions listed here. Is there a conflict with other device For Windows Users and Mac OS 10.x Users, consult LaCie drivers or extensions? Technical Support. See section 6.
  • Page 21 • If recording from CD or DVD-ROM to CD, make sure that the speed of the source device is high enough to provide a sufficient data stream to the LaCie drive. Reduce the write speed of the LaCie drive using the appropriate menu in the recording software.
  • Page 22 Troubleshooting LaCie CD-RW Drive User’s Manual page 21 USB 2.0 The Issue Questions to Ask Possible Solutions The USB 2.0 drive is not Is the drive connected to a USB 1.1 If so, it is normal that the drive runs at USB 1.1 speeds. A...
  • Page 23: Contacting Customer Support

    If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: •...
  • Page 24: Lacie Technical Support

    Contacting Customer Support LaCie CD-RW Drive User’s Manual page 23 USB 2.0 LaCie Technical Support LaCie Canada (English) LaCie Australia LaCie Belgium Contact Us At: Contact Us At: Contact Us At: http://www.lacie.com/au/contact/ http://www.lacie.com/be/contact/ http://www.lacie.com/caen/contact/ LaCie Denmark LaCie Finland LaCie France...
  • Page 25: Warranty

    • The tamper seal on the drive casing is broken. LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused as a result. As a precaution, it is recommended that the CD-R and CD-RW media be tested after they have been written to.

Table of Contents