Advertisement
ASSEMBLY INSTRUCTIONS
FOR FIRST ACT MD700
SEVEN PIECE DRUM SET
HI-HAT
CLUTCH
HI-HAT
CYMBALS
DRUM SEAT
HI-HAT
STAND
DRUMSTICKS
12" SNARE
DRUM
SNARE
STAND
18" BASS DRUM
© 2004 FIRST ACT INC. ALL RIGHTS RESERVED
10" TOM DRUM
TOM MOUNTING ARM
BASS DRUM
PEDAL WITH
FELT BEATER
CRASH
CYMBAL
CRASH
CYMBAL
STAND
TENSION
13" FLOOR
TOM
MD700
ROD
Advertisement
Related Manuals for First Act FIRST ACT MD700
Summary of Contents for First Act FIRST ACT MD700
-
Page 1: Assembly Instructions
DRUM SEAT HI-HAT STAND 10” TOM DRUM 12” SNARE TOM MOUNTING ARM DRUM SNARE STAND 18” BASS DRUM BASS DRUM PEDAL WITH FELT BEATER © 2004 FIRST ACT INC. ALL RIGHTS RESERVED CRASH CYMBAL CRASH CYMBAL STAND TENSION 13” FLOOR MD700... -
Page 2: Parts List
7 PIECE DRUM SET DRUMS [A] 12” Snare Drum [B] 10” Tom Drum [C] 13” Floor Tom Drum [D] 18” Bass Drum CYMBALS [E] 12” Hi-hat Cymbals (2) [F] 14” Crash Cymbal STANDS / HARDWARE / DRUM HEADS [G] Snare Stand... - Page 3 Place the 18” ebony front side bass drum head (T) over the top of the 18” bass drum so it sits evenly on the drum. Be sure and line up the First Act logo so it is aligned straight across the top of the drum face. Place the 18”metal hoop (P) on top so it rest on the head.
-
Page 4: How To Use
Use the order in the diagrams below. Apply an equal amount of tension to each lug. Turn each lug 1/4 turn until pitch and tone of the drum begin to sound. The smaller drums can have a higher pitch and the bass drum would then have the lowest pitch.