Identifying Front And Rear Panel; Front View - Sceptre E326 series User Manual

Identifying Front and Rear Panel

Front View

POWER INDICATOR – The light is red when power is plugged in but the TV is not turned on. The
light turns blue when the TV is turned on. Because of the LCD in the panel, the TV might take
10 – 12 seconds to power on.
REMOTE SENSOR – The remote sensor receives all the commands from the remote control.
TV Buttons
POWER – Turn on the TV by pressing the button once. Press the button again to turn off the TV.
SOURCE – This button switches between all the different sources of the TV. When the OSD is
active, this button acts as the enter button and confirms the menu selection.
MENU – This button activates the On Screen Display (OSD). If a sub-menu is active, pressing this
button will exit the OSD.
CH(▲) – This button changes the TV channel up. If the OSD is active, this button functions as up
for the menu.
CH(▼) – This button changes the TV channel down. If the OSD is active, this button functions as
down for the menu.
VOL(+) – This button increases the TV's volume. If a sub-menu is active, pressing this button will
move the select right.
VOL(-) – This button decreases the TV's volume. If a sub-menu is active, pressing this button will
move the selection left.
PLAY/PAUSE – Press this button to play or pause the DVD program you're watching.
EJECT – Press this button to open or close the DVD player.
**This picture shows the E326BD-HDW, it is exactly the same as the E326BV-HDW minus the
built in DVD player.
- 10 -
www.SCEPTRE.com
SCEPTRE E326 HDTV User Manual