Attaching Or Removing The Stand - Sceptre X32 User Manual

Attaching or Removing the Stand

1. To remove the stand, remove the 4 screws in the circled area and the stand will
come off.
2. To attach the stand place the display unit flat on a table. Afterwards attach the
neck piece onto the display by matching the two protruding clips and inserting
them in. Screw in the 4 screws to secure the neck. Do not over torque the type 2
screws. It will strip the plastic threading.
- 8 -
www.SCEPTRE.com
SCEPTRE X32 HDTV User Manual