Alvin Drawing Table "Caddy" TT499 Assembly Instructions

HARDWARE LIST

Key Qty. Description
A 1 Back Support Bracket (Thinner)
B 1 Front Support Bracket (Thicker)
C 1 Bolt for Tray Support (3/4")
D 3 Bolts for Tray Support (1/2")
E 4 Nuts
F 4 5/8" Mounting Screws
1. The instrument tray is reversible. It can be
mounted to the left or right side of
your table.
2. Attach tray support brackets (A & B) to
the instrument tray using bolts (C & D)
and nuts (E). Please note that the thicker
bracket (B) attaches to the front of the
tray and the thinner bracket (A) attaches
to the back. Please also note the proper
position for the longer bolt (C).
3. Position the assembled tray against the
left or right side of your table top and
mark the locations of the 4 mounting
screws on the underside of the table.
Pre-drill or pre-punch holes as desired.
4. Attach brackets to the underside of the
table top with the 4 mounting screws (F).
TT499 Drawing Table "Caddy"

Assembly Instructions

No. TT499-1 White • No. TT499-2 Black
A
B
C
D
E
F
ALVIN & CO., INC.
Bloomfield, CT • Grand Prairie, TX
www.alvinco.com
Front
B
E
F
D
C
Back
A
E
F
NOV 2004