Table of Contents
Advertisement
Quick Links
Fast Ethernet RoHS Compliant Long-Wavelength SFP Transceiver
PRODUCT FEATURES
Up to 200 Mb/s bi-directional
data links
Hot-pluggable SFP footprint
Built-in digital diagnostic functions
1310nm LED-based transmitter
Duplex LC connector
RoHS Compliant and Lead-Free
Up to 2km on 62.5/125μm MMF
Metal enclosure, for lower EMI
Single 3.3V power supply
Low power dissipation
Industrial operating temperature
range: -40°C to 85°C
Finisar's FTLF1217P2xTL Small Form Factor Pluggable (SFP) transceivers are
compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)
They are simultaneously compatible with 100Base-FX, FDDI, ESCON, and Multimode
SONET OC-3 SR-0 and OC-1 SR-0 standards as specified in IEEE Std 802.3
3
9314-3
, Enterprise Systems Architecture/390
They are RoHS compliant and lead-free per Directive 2002/95/EC
Application Note AN-2038. Digital diagnostics functions are available via the 2-wire
serial bus specified in the SFP MSA.
PRODUCT SELECTION
© Finisar Corporation September 13, 2008 Rev. B
Product Specification
FTLF1217P2xTL
4
FTLF1217P2xTL
x
W
Wide Extraction Bail
B
Narrow Extraction Bail
APPLICATIONS
125 Mb/s 100Base-FX Ethernet /
FDDI
200 Mb/s ESCON
155 Mb/s Multimode SONET
OC-3 SR-0
51 Mb/s Multimode SONET
OC-1 SR-0
, and ANSI T1.416.01-1999
4
and Finisar
1
.
2
, ISO/IEC
5
, respectively.
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Finisar FTLF1217P2XTL
Summary of Contents for Finisar FTLF1217P2XTL
-
Page 1: Product Specification
Low power dissipation Industrial operating temperature range: -40°C to 85°C Finisar’s FTLF1217P2xTL Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA) They are simultaneously compatible with 100Base-FX, FDDI, ESCON, and Multimode SONET OC-3 SR-0 and OC-1 SR-0 standards as specified in IEEE Std 802.3... -
Page 2: Pin Descriptions
FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 Pin Descriptions Symbol Transmitter Ground (Common with Receiver Ground) Transmitter Fault. FAULT Transmitter Disable. LED output disabled on high or open. MOD_DEF(2) Module Definition 2. Data line for Serial ID. MOD_DEF(1) Module Definition 1. Clock line for Serial ID. - Page 3 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 Towards Bezel Diagram of Host Board Connector Block Pin Numbers and Names © Finisar Corporation September 13, 2008 Rev. B VeeT VeeT TXFault TX Disable VeeT MOD-DEF(2) VccT MOD-DEF(1) VccR MOD-DEF(0) VeeR...
-
Page 4: Absolute Maximum Ratings
FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 Absolute Maximum Ratings Parameter Maximum Supply Voltage Storage Temperature Case Operating Temperature Relative Humidity III. Electrical Characteristics Parameter Supply Voltage Supply Current Transmitter Input differential impedance Single ended data input swing Transmit Disable Voltage... -
Page 5: Optical Characteristics
FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 Optical Characteristics Parameter Transmitter Output Opt. Power Optical Wavelength Spectral Width (FWHM) Optical Rise/Fall Time ≤ 155 Mb/s Optical Rise/Fall Time = 200 Mb/s Systematic Jitter Contribution Contributed Duty Cycle Distortion Data Dependent Jitter Contribution... -
Page 6: General Specifications
VII. Regulatory Compliance Finisar transceivers are Class 1 eye safety products and comply with US FDA regulations. These products are certified by TÜV and CSA to meet the Class 1 eye safety requirements of EN (IEC) 60825 and the electrical safety requirements of EN (IEC) 60950. - Page 7 ID memory map remains unchanged. The interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source Agreement. The complete interface is described in Finisar Application Note AN- 2030: “Digital Diagnostics Monitoring Interface for SFP Optical Transceivers”.
- Page 8 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 IX. Digital Diagnostic Specifications FTLF1217P2xTL transceivers have internally calibrated digital diagnostics. Parameter Accuracy Internally measured transceiver temperature Internally measured transceiver supply voltage Measured TX bias current Measured TX output power Measured RX received average...
- Page 9 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 Mechanical Specifications Finisar’s Small Form Factor Pluggable (SFP) transceivers are compatible with the dimensions defined by the SFP Multi-Sourcing Agreement (MSA). FTLF1217P2BTL © Finisar Corporation September 13, 2008 Rev. B Page 9...
- Page 10 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 FTLF1217P2WTL © Finisar Corporation September 13, 2008 Rev. B Page 10...
- Page 11 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 XI. PCB Layout and Bezel Recommendations © Finisar Corporation September 13, 2008 Rev. B Page 11...
- Page 12 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 © Finisar Corporation September 13, 2008 Rev. B Page 12...
- Page 13 FTLF1217P2xTL Pluggable SFP Product Specification – September 2008 XII. References 1. Small Form-factor Pluggable (SFP) Transceiver Multi-source Agreement (MSA). September 14, 2000. 2. IEEE Std 802.3, 2002 Edition, Clause 38, PMD Type 1000BASE-LX. IEEE Standards Department, 2002. 3. ISO/IEC 9314-3. “Information Processing Systems – Fibre Distributed Data Interface (FDDI), Part 3, Phystical Layer Medium Dependent (PMD).”...
Need help?
Do you have a question about the FTLF1217P2XTL and is the answer not in the manual?
Questions and answers