Advertisement
1)
Select to get IP address automatically. It means no ne ed to
input IP address, subnet or
will select IP automatically. It can be inline after exit.
2)
Select to click static IP address. It needs to input relevant IP
address, subnet and gateway in each box below. The
number of IP address can be input through clicking input box
to popup soft keyboard entry or d irectly connecting the
keyboard entry of the host machi ne. After finishing one IP
address input, click the other input boxes to input again.
3)
Click OK to finish settings.
Pairing Remote
Remove the battery cover from the white remote.
You should see a small hole with the word "Pair" next to it.
Push a pin to this hole to activate pairing mode.
A red light should turn on in the battery compartment.
Point the remote at SD card slot on the Agora IPTV Portal.
It will take about 4-5 seconds to complete the pairing process.
The red light will turn off and you will be able to move the
cursor using the remote.
default gateway for the system
11
Advertisement
