Advertisement
Kogan Australia / KAADP01BLTA / Quick Start Guide
Bluetooth Adapter for Home Audio
Compatibility
● The playback device must support the Bluetooth Advanced Audio Distribution (A2DP) profile.
● The playback device must support the Bluetooth Audio Video Remote Control (AVRCP) profile.
● If using with a mobile phone, the device must support the Bluetooth Headset (HSP) or Hands-free
(HFP) profile and support Bluetooth A2DP.
● If using with a computer, the device must support Bluetooth HSP.
Charging
For first-time use, we recommend charging the device for 2-3 hours.
Charging Instructions
1. The red LED will flash continuously when the battery is low on power.
2. Connect the device to your computer via the USB cable supplied.
3. When fully charged, the blue LED will remain on.
4. Disconnect the device from the USB cable.
General Use
Powering On
Long-press the Multi-function Button (MFB) until the blue LED gives a long flash.
Powering Off
Long-press the MFB until the red LED gives a long flash.
Pairing
While the Bluetooth Adapter is off, hold down the MFB until the red and blue LEDs flash alternatively.
The device is now ready to be discovered by your playback device (your mobile phone, tablet or laptop).
Follow the instructions for your playback device to pair (or connect) to the Bluetooth Adapter. Once
connected successfully, attach your speaker system or headphones to the 3.5mm TRS connection on the
Bluetooth adapter. All audio from your playback device will now be streamed to your connected output
system.
1
Advertisement
