Equipment Basic Settings - Kogan KATBL10A08E User Manual

3. Equipment basic Settings

Set up: Click the Settings icon in the menu page
•
Press and hold the screen up or down pull to turn pages
•
• 3.1. Wireless settings
• 3.1.1. WIFI settings
Click the WIFI "ON" button in the Settings menu, which will launch WIFI. The right side of the
•
display area will display all nearby available WIFI networks.
Click on the desired WIFI network name, enter the correct password to connect to the Internet.
•
• 3.1.2. Bluetooth settings
Click on the Settings menu in Bluetooth
•
of the display area will display all available Bluetooth devices.
• 3.1.3. Mobile network settings
Click the wireless network button
•
VPN , portable hot spot , mobile network.
Click on the " mobile network " button, enter the mobile network settings. Built – in module power
•
supply, data flow, data roaming is enabled , set after the opening of the mobile Internet
3.2. Sound Settings
Click the Settings menu
•
default notification sounds, open and close touch tone and lock screen.
3.3. Display Settings
Click the Settings menu
•
adjust display brightness, change wallpaper, automatically rotate the screen, set screen saver
timing and alter font size.
3.4. Store information
Click the Settings menu
•
Click the upper right corner
•
Click on the USD computer connection, Check the storage mode as shown in Figure:
•
- Media devices (MTP)
- Camera (PTP)
- a mass storage device
3.5. Battery Information
Click the Settings menu
•
"
" ",
to enter the setting interface, Can adjust the volume, change
" "
which will go into the display settings interface. Here you can
" ",
where you can view the current store information
" "
Symbol Appear USD computer is connected
to view the current battery storage information
" "
to enter the setting interface
" "
then enter the setting interface. The right side
" ,
then enter the mobile network settings. Including
3