Tritton AX Visor TRI-BC200 Operating Instructions

Function Action / Tone Indicator Display
Short click (+) or (-) to adjust volume. To
Volume Control adjust volume in continuous increments,
click and hold (+) or (-) button.
For privacy reasons, if you don't want the
party on the other line to hear your voice,
Microphone you can mute the microphone by long
Mic. Muted
Mute clicking MUTE/HOLD button. To cancel
mute function, long click MUTE/HOLD
button.
To transfer calls from AX Visor to phone and
Call Transfer vice versa, long click Mute / Handset during Call Transferred
mode.
During talk mode, if you receive another
call, lshort click MFB button to hold the 1st
call and answer 2nd call. To toggle between
calls, short click MFB button. During talk
Answer 2nd line
mode, by short-clicking MFB, you can end
Call Waited
/ 3 Way Call
the current call to continue with the next call.
Note: 3 Way Call function is only applicable
if user has subscribed for such service.
8
CONTENTS
Introduction...................................................................................................
Safety Instructions.......................................................................................
Product Features.........................................................................................
Package Contents.......................................................................................
Description of Parts.....................................................................................
OLED Display Features..............................................................................
Charging the AX Visor Battery ....................................................................
Switching the AX Visor ON/OFF.................................................................
Basic Handsfree Operations for the AX Visor...........................................
Pairing the AX Visor with other Bluetooth Devices...................................
Echo and Noise Cancellation......................................................
Attaching the AX Visor onto a Sun Visor.....................................................
Product Specifications................................................................
Product Warranty.................................................................................
Phone Support: 800-431-1176
Online Support: www.TRITTONUSA.com
1
Email Support: support@trittonusa.com
Pairing the AX Visor with other Bluetooth Devices Echo and Noise Cancellation
- Integrated DSP(Digital Signal Processor) eliminates echo and noise thereby
Function Action / Tone Indicator Display
providing clear voice quality even under harsh environmental conditions.
To put AX Visor in pairing mode, while
- If AX Visor is used as 'Car Handsfree' mode in car, it eliminates most
pressing MFB, slide Power Switch from x
surrounding noise (engine noise, wind noise, surrounding noise, radio sound
to o. Keep pressing the MFB until you see Wait for Pairing
'Wait for Pairing', AX Visor and Bluetooth etc.) and delivers clear voice to the other party. Also, it eliminates echo signals
Pairing Mode Tritton TRI-BC200
Device Address. AX Visor is now ready to created by transmission of car speaker sounds to the microphone. The above
be paired. Pairing mode lasts for 3 mechanism for echo and noise cancellation is realized through the use of 2
minutes, after this period AX Visor returns 00150E001A05
microphone system and algorithm which cancels out unnecessary noise,
to standby mode.
while delivering only the user's voice. Due to this, for best in-car
performance, mount the AX Visor (upside down) on the sun visor.
From a Bluetooth phone or PC, search for
AX Visor. When prompted for pinkey, enter
'0000' which is the pinkey for AX Visor. Pairing Success
When paired, you will see 'Pairing
Success' followed by display of
Pairing Successful 'Connection States' and 'Battery Level
& Indicator.
Connection State If AX Visor was paired in upside down
position(Car Handsfree mode), car icon
will be displayed and likewise, if it was
paired in upright position(Speakerphone
mode), then the sound icon will be
displayed.
- Alternately, if AX Visor is used as 'Speakerphone' mode (right-side up), it
doesn't matter in which direction the AX Visor is placed as noise signals
In idle mode, short click MFB to check the
generated from all directions will be processed thereby making it suitable for
connection status. If Bluetooth icon is
Connection State
highlighted, it means AX Visor is in
conference calls.
connection state.
Under the following circumstance, AX
Visor automatically attempts to reconnect
to the last connected device.
- When car engine is started (when engine Connecting...
Reconnect vibration has been detected)
Function - If AX Visor is disconnected, long click
MFB until you hear the beep tone followed
by display of Connecting...'image. AX
Visor will then reconnect to the last device
used.
To prevent accidental button activation - The transition from one mode to another and vice-versa takes place
while the device is being carried around, automatically. That is, if AX Visor is placed upright, 'Speakerphone' mode
Button Hold
lock the button operations by long clicking
will be activated and likewise, if it is placed upside down, 'Car Handsfree'
Function
MUTE/HOLD button. To unlock, long click
mode will be activated. However, this automatic mode transition doesn't take
MUTE/HOLD button.
effect during talk mode.
9
Introduction Product Features
Thank you for purchasing the Tritton AX Visor Bluetooth handsfree kit. The AX Visor
2
incorporates state-of-the-art wireless handsfree and speakerphone technology. High Quality Wireless Handsfree Function
2
It functions as a 'Car Handsfree Kit' or 'Portable Speakerphone' when linked to
3
Bluetooth phones supporting headset or handsfree profiles.
4 Uniquely designed to be portable and versatile, the AX Visor will provide you with
maximum comfort and satisfaction for all of your handsfree needs whether you use
4
the device in a car, outdoor or in an office.
5
6
Safety Instructions
6
- Check the laws and regulations on the use of mobile phones and handsfree
Enhanced Echo & Noise
7
equipments in areas you intend to use the AX Visor.
Cancellation via DSP
9 - As much as possible, do not manipulate the buttons of the device while driving.
- Do not expose the device to direct sunlight especially on the dashboard of a car in
10
extreme temperatures as it may cause product deformation and even battery
11
explosion. For safety, store the device in glove or console box when not in use.
12
- When cleaning the device, do not use any type of abrasive pad, scouring powder or
13 solvents as these may render the finish dull permanently.
- When charging the device using AC/DC adapter, please make sure the correct
input voltage is used.
Detection Function Automatic
Bluetooth Connection
- Charge the battery for at least 2 hours before using.
- Do not use in places like hospitals, airplanes etc. where use of electronic devices is
prohibited.
- Do not expose the device to extremes of temperature, moisture and vibrations.
2
Attaching the AX Visor onto a Sun Visor
- Mount the clip onto the back of AX Visor and slide the clip onto sun visor as
shown below
8004311176
8004311176 8004311176
10 11
Package Contents
- Bluetooth Handsfree Kit (AX Visor)
- Sun Visor Clip
Dual (Car and Indoor) Application –
- AC/DC Charger Adapter
Automatic Mode Switching
- USB Cable
- User Manual
0313810295 Description of Parts
0313810295
Speaker
Mute / Handset Button
Automatic Invertible Display Function
Volume Control
8004311176
8004311176
Display
Charging and Firmware
Microphone
Upgrade via USB
Power Switch
USB Port MFB
Many of the buttons perform multiple tasks, based upon if they are tapped, or held
down. We call this "Short Click" and "Long Click" respectively throughout the manual.
3 4
Product Specifications Product Warranty
-
Tritton Technologies warrants this product against all defects in material and workmanship
Standards Bluetooth Specification V1.2
for a period of one year from the date of purchase by end user. The conditions for warranty
are as follows .
-
RF Frequency Range 2402 ~ 2480 MHz The warranty is valid only if the original receipt issued to the original purchaser by the dealer
is presented with the product to be repaired or replaced.
-
The warranty is void if the serial number, date of purchase and/or product label has
Profiles Supported Headset, Handsfree
been removed.
-
The warranty does not cover any failure or damage of the product due to normal wear and
Transmission Power 0.25 ~ 2.5mW (Class 2) tear, physical abuse, improper installation, misuse, modification or repairs by unauthorized
third parties.
-
Tritton Technologies does not assume responsibility for any loss or damage incurred during
Distance 10m (in open space)
shipment and as a result of force majeure.
-
Tritton Technologies is not liable for any incidental or consequential damages arising from the
Audio Output > 1W use or misuse of the product.
-
All warranty claims are limited to repair or replacement of the defective product at the sole
discretion of Tritton Technologies.
Battery Life Standby > 400 hrs -
If Tritton Technologies repairs or replaces the product, the repaired or replaced product shall be
Continuous Talk Time > 15 hrs warranted for the remaining time of the original warranty period. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced part or product
becomes the property of Tritton Technologies.
Charging Time < 3 hrs
-
Consumable components, such as batteries, are not included in the warranty obligation.
Charging Voltage DC +5V (USB)
Adapter Input AC 90~250V Disclaimer Notice
The manufacturer shall not be liable for errors contained herein or for incidental or consequential damages in connection with the
furnishing, performance or use of this material. This document contains proprietary information, which is protected by
international patent applications and copyright. All rights reserved. No part of this document may be copied, reproduced or
translated without prior written consent of the manufacturer. The manufacturer reserves the right to revise this publication and to
Buttons Power On/Off,Multi-Function Button,
make changes from time to time in the contents hereof without obligation to notify any person of such revisions or changes. The
manufacturer also reserves the right to change the specifications without notice.
Mute Button,Volume Up/Down
European CE notice to users and product statements
Display 128 X 32 dots OLED (white) This product is C E marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, Tritton Technologies Co., Ltd,
declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For further information, please contact http://www.trittonusa.com
Weight 63g
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
Operating Temp. & Humidity -10 ~ +50°C,Rel.Humidity 0 ~ 95%
void the user's authority to operate the equipment.
Certification BQB, FCC, CE, MIC WEEE Directive 2002/96/EC Art. 11(2)
The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about
recycling of this product, please contact your local city office, your household waste disposal service or the shop where
you purchased the product.
12 13
OLED Display Features Charging the AX Visor Battery
Bluetooth - If battery level is low, battery level indicator icon will be
Connection
Mode Indicator displayed as empty.
Status
Hold Indicator Battery Indicator - To charge the battery, connect the handsfree kit to AC/DC
power adapter or PC using the USB Cable.
- During charging, the battery level indicator will flash with the
text 'Charging' displayed in static motion.
Car Handsfree Mode :
Buttons locked
Optimum voice quality Charging ....
when mounted onto
Buttons unlocked sun visor.
- When charged, the text 'Charged' will flash on the OLED screen.
Bluetooth Connected
Speakerphone Mode :
Optimum voice quality
when placed on table
Bluetooth Disconnected Charged
Automatic Mode Switching & Invertible Display Function
Switching the AX Visor ON/OFF
The AX Visor is equipped with Automatic Mode Switching as well as Automatic
Invertible OLED functions.
- To switch on AX Visor, slide the power switch to O. You will
Automatic Mode Switching sets the best talk environment for the user depending hear a boot tone, it will display the TRITTON logo followed by
on where the AX Visor is used. If the AX Visor is clipped onto a sun visor, it
connection state icons and battery level indication. For battery
automatically enters into Car Handsfree Mode, Uni directional Microphone, and
power saving, display enters sleep mode after 10 seconds.
when placed on a table, it enters into Speakerphone mode (patent pending) with
Omni directional Microphone.
The OLED display will automatically invert to an upright viewing direction
depending on whether the AX Visor is placed upright or upside down.
- To switch off AX Visor, slide the power switch to X.
To conserve battery life, the
Except during talk mode, battery power consumption is very
8004311176 display automatically switches
8004311176 low and therefore, it is not necessary to switch off power.
off after 10 seconds. To see the
display again, short click MFB. By keeping the AX Visor switch on, you can enjoy the special
8004311176
8004311176
feature of 'Automatic Connection' to the phone when car
engine is started.
5 6
Bluetooth ® Hands-Free Car Kit TRI-BC200
Speaker Phone with Caller ID Rev 1.0
Basic Handsfree Operations for the AX Visor
Function Action / Tone Indicator Display
On an incoming call, 'Ringing' and 'Caller ID'
will be displayed alternately. If Caller ID
Ringing...
function is not supported by the phone, then
Answer Call only 'Ringing...' will be displayed. To answer 0313810295
call, short click MFB.(For acronym
references, please see page 4)
To make a call, first dial from the phone and
short click MFB to switch call to AX Visor
Make Call
Call Transferred
Note : Some phones allow direct call transfer
without having to press MFB.
To redial, short click MFB. For some phones,
when MFB is short clicked, it first displays the
numbers last called or received. In this case,
Redial
Redialing...
short click MFB again to redial. Note : Some
phones allow direct redial by short clicking
MFB just once.
To voice dial, make sure your phone supports
voice dialing function and that it is activated
and voice tags have been recorded. In idle
Voice Dial
Voice Dialing
mode, short click MFB to first display the
icons and then long click MFB to initiate voice
dial.
To end call first, short click MFB during 'Talk
Mode'. If other party ends the call first, AX
Call Ended
End Call Visor automatically returns to handsfree
07:25
standby mode. After call is ended, talk time
will also be displayed.
Reject Call To reject incoming call, long click MFB.
Call Rejected
7