Cleaning Lambswool Duster With Vacuum Chamber - FilterStream D4500 Instruction Manual

CLEANING LAMBSWOOL DUSTER WITH VACUUM CHAMBER

1. Your DustTamer Ultra
Vacuum Chamber can be
conveniently carried from
room to room operating on
battery power.
2. The number of times you
clean your Lambswool Duster
in the Vacuum Chamber will
be determined by the amount
of dust you pick up. Rooms
with heavy dust accumulation
may require several cleanings,
whereas small rooms or quick
touch-up dusting may only
require one cleaning.
Your DustTamer Ultra® is
designed to clean everyday
household dust, not thick,
decades old dust found in
attics, garages, warehouses, etc.
Note: To keep your Lambswool
Duster free of dust and allergens,
we recommend periodic cleaning
of your Lambswool Duster in
the Vacuum Chamber, even if
dust isn't visible on the
Lambswool Duster.
® To clean your Lambswool Duster
in the Vacuum Chamber, simply
follow these steps:
a. Press and hold the unit's
on/off switch to start the
suction action. (see figure 4)
b. Insert the lambswool duster
into the vacuum chamber and
slowly move the duster in an
up and down twisting motion
several times. (see Figure 5)
c. The combination of the Dust
Agitation/Suction Vents with
the up and down twisting
motion will most effectively
remove dust from the
Lambswool Duster. Hold the
on/off switch to maintain the
suction. Release to turn the
unit off.
During the above cleaning
cycle, dust and allergens are
being suctioned away and
captured in the Dust Drawer's
Stainless Steel Pre-Filter Screen
and the HEPA Filter (see figure
6). Only clean, allergen free air is
recirculated into your home.
Your Lambswool Duster is now
clean and ready to dust another
room in your house.
12