Simply the easiest installation and servicing ever!
How to service and clean
Specification and contents
Compression Nylon Cap
Neodymium manet
assembly, hermetically
sealed in SSTL304
Polypropylene " Snorkel"
½" BSP drain valve – pre-assembled with thread lock
Salus Controls plc : SALUS House, Dodworth Business Park South, Whinby Road, Dodworth, Barnsley S75 3SP
Tel: 01226 323961 | Fax: 01226 240588 | Email: sales@salus-tech.com
Hydrolysis resistant Nylon Lid
assembly with EPDM "O" ring
500ml hydrolysis resistant circulation chamber
22mm compression Inlet
and out let 360 swivel
isolation valve (x2)
110mm
How to install
Also Supplied:
Servicing Kit - comprising of 1 x 'O' EPDM ring, 2 inlet/outlet
washers, instruction manual and warranty card.
SALUS recommends the use of SALUS SYSTEM
GUARD products with the MAG DEFENDER.