Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Rosewill RSV-L4411
Summary of Contents for Rosewill RSV-L4411
- Page 1 SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual...
-
Page 2: Table Of Contents
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Contents Product Overview..........................2 Introduction ..........................3 Feature ............................3 Specification..........................3 Installation Guide ..........................4 Top Cover Disassembly......................4 Hard Drive Tray Assembly / Disassembly ................. 5 Hard Drive Installation ........................ 5 Installing a 3.5”... -
Page 3: Product Overview
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Product Overview... -
Page 4: Introduction
E-ATX (12” x 13”) and smaller form factor motherboards. It holds PS2 power supply which provides customers with wider selection and more affordable choices depending on the system design purposes. In addition, RSV-L4411 holds 12 hot swap SATA bays with a large-scale fan filter and easy-to-use knob key for great serviceability of the system. -
Page 5: Installation Guide
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Installation Guide Top Cover Disassembly Remove the screws from each side of the Chassis. (two on each side) Once the screws removed, push the top cover to remove from the chassis. -
Page 6: Hard Drive Tray Assembly / Disassembly
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Hard Drive Tray Assembly / Disassembly Each HDD Tray has a press button for releasing the hinge. To remove the HDD Tray; first press the button (red circle). Upon press the button, the HDD tray will be easily pull out. -
Page 7: Installing A 2.5" Hdd
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Once align, you can fasten the screws on both side of the tray to fix the HDD. (Please make sure that the connector of the HDD is facing outward) Installing a 2.5” HDD To install a 2.5”... -
Page 8: Hot Swap Module Cable Installation
SERVER CHASSIS WITH 12x HOT-SWAPPABLE SATA BAY RSV-L4411 User Manual Hot Swap Module Cable Installation Server Rail Installation In order to install the rail, you must first remove the cover on the side. Three screws locate on each side. Unscrew all three screws on each side. - Page 9 Upon removing the side bar, you will find several screw holes for you to install the server rail. Thank you for purchasing a quality Rosewill Product. Please register your product at: www.rosewill.com for complete warranty information and future support for your product.