Listen To An Audio Source While A Video Is Playing - Jeep Uconnect Multimedia User Manual

Listen to an Audio Source while a video is
playing
Ensure the Remote Control and Headphone switch are on
the same channel. If watching a video on Screen 1
(second row), then Channel 2 is for audio only. If watch-
ing a video on Screen 2 (third row), then Channel 1 is for
audio only.
Using the Remote Control
1. Press the MODE button on the Remote Control and
either the Mode Select Screen will display or a small
banner will appear at the bottom of the screen.
2. To listen to an audio source on Channel 1 or 2, either
press Up/Down/Left/Right on the Remote Control to
highlight the desired audio source or press the MODE
button repeatedly until the desired audio source appears
on the screen.
Uconnect™ Multimedia - Video Entertainment System (VES)™ 67
Select FM mode on the VES screen.
Using the Touch Screen Radio controls
1. Press the MENU hard-key on the radio faceplate.
2. Touch the Rear VES soft-key to display the Rear VES
Controls. If a channel list is displayed, touch the HIDE
LIST soft-key to display the Rear VES Controls screen.
3