Jabra GN1200 Datasheet

JABRA GN1200
dAtAsheet
Simple connectivity.
Greater convenience.
The Jabra GN1200 cord is the solution to a common problem
of not being able to connect the headset and telephone.
Even though most things have been standardised, the cord
connecting the phone with the handset or headset is anything
but standard as each telephone manufacturer has its own
wiring code. Now, with the universal "smart" cord, Jabra
GN1200, the cord will work with virtually any phone providing
greater convenience.
- Works with most desk phones including IP hard phones
- Microphone amplification to boost transmit levels when
connecting to low transmit volume phone systems
- Simple slide adjustment for easy setup
When hooking up a new headset there is not always a dial
tone. The problem could be the headset or the telephone.
But chances are it is the cord. Even though the headset and
telephone may be plug-compatible, the wiring is determined by
the individual telephone manufacturer.
Jabra GN1200
Jabra GN1200 features eight separate wiring schemes –
including three with built-in microphone amplification. Just
connect the Jabra GN1200 and headset through the Quick
Disconnect plug and flick the slider from one position to the
next until a dial tone is heard. It's as simple as that!
Available in both straight and coiled versions, the Jabra GN1200
fits virtually all telephones featuring a standard RJ9 modular
connection.
JABRA ® is A ReGisteRed tRAdemARk of GN Netcom A/s
www.JABRA.co.uk