Do you have a question about the A Sierra Monitor Company FS-8700-123 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for FieldServer A Sierra Monitor Company FS-8700-123
Page 1
Driver Manual (Supplement to the FieldServer Instruction Manual) FS-8700-123 MetOne Particle Counter HACH Ultra Analytics (formerly Pacific Scientific Instruments) Standard Protocol FX (enhanced) - ENG110 APPLICABILITY & EFFECTIVITY Effective for all systems manufactured after April 2010 A Sierra Monitor Company Driver Version: 1.00...
For each configured node each time the FieldServer sends a message to the device it will select the device (and the select the sub-device or port if specified) and then the message will be sent. If the most recent message sent was sent to the device the driver will do the selection to ensure the correct device response.
The FS-8917-16 cable is not needed for RS-485 on the X30 and X40 only. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com RS-485...
This section documents and describes the parameters necessary for configuring the FieldServer to communicate with a MetOne Particle Counter Serial Server. The configuration file tells the FieldServer about its interfaces and the routing of data required. In order to enable the FieldServer for MetOne Particle Counter Serial communications the driver independent FieldServer buffers need to be declared in the “Data Arrays”...
Scan_Interval Rate at which data is polled FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Legal Values Up to 32 alphanumeric characters...
‘C’ to indicate the field device is counting a ‘H’ to indicate the device is holding and an ‘S’ to indicate that it has stopped. If the mode is not recognized the driver stores a ‘?’. If another protocol reads these states from the FieldServer it will probably display the ASCII value corresponding to each mode letter: ‘C’=67 ‘H’=72 and ‘S’=83...
If the value found is not valid then no command is sent. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Page 12 of 22...
When this is done the driver stores the read current record response byte for byte in the secondary DA. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Page 14 of 22 , Data_Array_Offset...
When using this type of Map Descriptor the driver does not send a device select message first. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Page 16 of 22 , Function...
Appendix A. Useful Features Appendix A.1. Driver Operating and Error Statistics These notes outline driver specific use of the normal driver operating stats documented in the FieldServer Configuration Manual. Timeouts: During normal polling a timeout can mean that the field device did not respond to the select message (or the sub-device select message) or did not respond to the poll for data or the command poll.
MET1:#07d Err. Cant find DA=%s to store times. Update the configuration file download the modified configuration file and reset the FieldServer for the changes to take effect. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Description An attempt was made to send a mode control command to a device.
Page 20
MET1:#21 Err. Met1_Function='%s' not recognized Update the configuration file download the modified configuration file and reset the FieldServer for the changes to take effect FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Description Printed by the Server side of the driver.
Increments by 1 each time the Client side sends a port select message FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com , Data_Array_Length...
Therefore they should not be used until this issue is resolved. FieldServer Technologies 1991 Tarob Court Milpitas California 95035 USA Web: www.fieldserver.com Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com Page 22 of 22...
Need help?
Do you have a question about the A Sierra Monitor Company FS-8700-123 and is the answer not in the manual?
Questions and answers