Field Controls Clearwave Water Conditioner CW-HD-2 Instruction Manual

CLEARWAVE
™
The ClearWave is the most advanced hi-tech computerized anti-scale device available today. It
operates by using a programmed 'chip' to constantly cycle through and induce over 200 different electro-
magnetic low frequency wave pulses into the water. These wave pulses produce water with remarkable
anti-scale properties, without adding salts or chemicals, at an operating cost for electricity of
approximately $25.00 per year.
P S : 18 VAC, 25 Watts, .22 Amps
OWER PECIFICATIONS
HOW IT WORKS
Pure water contains nothing but H
minerals. Minerals such as calcium and magnesium are the main components of hard water, and the
cause of scale formation and other problems.
There are three basic methods used to control the problem of hardness and specifically scale
I E :
ON XCHANGE
One method is to remove the calcium and magnesium from the water through ion exchange (the
traditional water softener). This method requires the use of a resin filled tank with a high concentration of
salt ions. As the water flows through the resin tank the salt ions (typically sodium) are exchanged for the
calcium or magnesium ions. This lowers the concentration of the minerals that cause scale and therefore
inhibits scale formation.
C A :
HEMICAL DDITION
A second method used to control hard water scale is the addition of chemicals (such as phosphates) to
the water. These materials chemically alter the scaling characteristics of the calcium or magnesium,
allowing the concentration of the minerals to stay the same while still reducing scale formation and its
affects.
Both of the above methods require the use of consumable materials to change the makeup of the water.
For these devices to function properly, the homeowner must continuously replenish the salts or chemicals
as well as perform periodic maintenance on the equipment. In addition to these inconveniences, the
chemicals and salts discharged into the effluent water present problems downstream to the municipal
water treatment facility and the environment. Many U.S. cities have been enacting and/or evaluating
environmental legislation to limit or reduce the levels of chemicals or salts that result from these types of
water treatment methods.
E P :
LECTRIC OTENTIAL
A third method used to treat the hard water problems associated with scale utilizes changes in electrical
potential in the water to produce the affects of chemical addition. The electric potential applied changes
the scaling characteristics of the calcium or magnesium without the removal of these ions or the addition
of chemicals.
™
WATER CONDITIONER
MODEL CW-HD-2
0. But water, as it comes out of the ground, is rich in a multitude of
2
formation.