Nohead Clause; No Headings For Single Report Items; No Headings For All Report Items - Tandem ENFORM 058057 Reference Manual

Clauses

NOHEAD Clause

NOHEAD Clause
No Headings for Single
Report Items
No Headings for All
Report Items
5–46
The NOHEAD clause allows you to specify suppression of the printing of the column
heading of a target-item or by-item. The syntax of the NOHEAD clause is:
target-item
{ }
by-item
NOHEAD ALL
target-item
is a record name, a field name, a numeric literal, a predefined aggregate, a user
aggregate, an arithmetic expression, an IF/THEN/ELSE expression, a user table
name, a user variable, a System Variable clause, or a JULIAN-DATE clause.
by-item
is the name of a field grouped by a BY or BY DESC clause.
The NOHEAD clause following a LIST target-item suppresses the column heading for
the target-item.
Sometimes it is undesirable to print a column heading for an item such as when you
want to print more than one target-item under the same column heading. In the
following example, the address, city, and state are all printed in the same column:
LIST suppnum,
address / TAB 10,
city NOHEAD / TAB 10,
state NOHEAD;
SUPPNUM
------- ----------------------
1 19333 VALLCO PARKWAY
CUPERTINO
CALIFORNIA
2 2000 BAKER STREET
IRVINE
CALIFORNIA
The NOHEAD ALL clause suppresses column headings for all the target-items
specified in a LIST statement. It must follow the WHERE clause in the LIST statement.
Refer to the syntax of the LIST statement in Section 4 for the relative locations of the
clauses within a LIST statement.
058057 Tandem Computers Incorporated
NOHEAD
ADDRESS