Table of Contents
Advertisement
TECMNOCAL & CXXVlSlBlMER INFORMATOON
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine inspected
and repaired by your servicing dealer.
l
Hard starting or stalling after starting.
l
Rough idle.
l
Misfiring or backfiring under load.
l
Afterburning
(backfiring).
l
Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your Honda engine were designed, built,
and certified to conform with EPA and California emission regulations.
We
recommend
the use of genuine Honda parts whenever
you have mainte-
nance done. These original-design
replacement
parts are manufactured
to
the same standards as the original parts, so you can be confident of their
performance. The use of replacement parts that are not of the original design
and quality may impair the effectiveness
of your emission control system.
A manufacturer
of an aftermarket part assumes the responsibility
that the
part will not adversely
affect emission performance.
The manufacturer
or
rebuilder of the part must certify that use of the part will not result in a
failure of the engine to comply with emission regulations.
Maintenance
Follow
the maintenance
schedule
on page 39. Remember
that this
schedule is based on the assumption
that your machine will be used for
its designed purpose. Sustained high-load or high-temperature
operation, will
require more frequent service.
66
Advertisement
Table of Contents
