Honda RDX Owner's Manual page 264

Bluetooth HandsFreeLink
3. Press and release the Talk button.
After the beep, say the four-digit
code you want to use. For example,
say ''1, 2, 3, 4.'' The HFL response
is, ''1, 2, 3, 4. Is this correct?''
4. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFL response is ''Searching for a
Bluetooth phone. Make sure the
phone you are trying to pair is in
Discovery mode.''
258
Steps 5 and 6 show a
NOTE:
common way to get your phone into
its Discovery mode. If these steps do
not work on your phone, refer to the
phone's operating manual.
5. Follow the prompts on your phone
to get it into its Discovery mode.
The phone will search for the HFL.
When it comes up, select
HandsFreeLink from the list of
options displayed on your phone.
6. When asked by the phone, enter
the four-digit code from step 3 into
your phone. The HFL response is
''A new phone has been found.
What would you like to name this
phone?''
7. Press and release the Talk button.
After the beep, say the name you
want to use. For example, say
''Eric's phone.'' The HFL response
is ''Eric's phone has been
successfully paired. Returning to
the main menu.''
8. If you want to pair another phone,
repeat steps 1 through 7.
Once the pairing process is
completed, AcuraLink may display a
connection confirmation screen. This
screen is used to create a data
connection between your cell phone
and the AcuraLink system. You can
choose to set up the data connection
now, or do it later. If you want to do
it now, exit the HFL menu by
pressing the HFL Back button one
or more times.