HoMedics QRM-400H Instruction Manual And Warranty page 5

Massaging Cushion
Moving Quad-Roller Massage Mechanism
Power Button
To turn on the massage
functions, first press
the POWER button. The
Shiatsu Massage
L.E.D. indicator will
Shiatsu is a deep
illuminate and confirm your
kneading massage.
selection. To turn off the
massage functions, simply Shiatsu Programs
press the button again.
Choose from 3 preset
The L.E.D. indicator will
programs where the Shiatsu
blink while the massage
massage travels up and down
mechanism returns to its
in a specific area of the back.
lowest point and then it will
To select a program, simply
turn off.
press the button and the L.E.D.
will illuminate. To deselect,
NOTE: The moving
press the button again or press
massage mechanism
another button.
always "parks"
Spot Shiatsu
or finishes in its
While the unit is in Shiatsu
lowest position. It
massage, press either button
will continue to this
to stop and focus the Shiatsu
position after the
action in one place. Once
power has been
the unit is operating in Spot
turned off. If the
Shiatsu, you may adjust the
electrical supply is
mechanism position by holding
interrupted, when
down either button until the
power is restored,
desired position is reached.
the mechanism will
The Up Arrow will move the
"park" or move to
mechanism upwards and the
its lowest position.
Down Arrow will move it down.
Once you release the button,
the mechanism will stop in
that place.
Quad-Roller
8
Demo Button
For a brief demonstration of the features of the Quad-Roller
Massaging Cushion, press the Demo button. The unit will
briefly go through each function. Once completed, the unit
automatically turns off. The L.E.D. light will blink to indicate
active function.
Rolling Massage
Rolling is like two hands working slowly up and down
your back.
Width Adjustment
While the unit is in Rolling massage, press this button to
adjust the distance or width between the massage heads.
With each press, the massage heads will move to the next
available position.
Rolling Programs
Choose from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back. To select
a program, simply press the button and the L.E.D. will
illuminate. To deselect, press the button again or press
another button.
Heat Button
For soothing heat, when massage is on, simply press the
heat button and the corresponding red L.E.D. light will
illuminate. To deselect, press the button again and the
corresponding L.E.D. light will turn off. For your safety, heat
cannot be turned on if no massage program is selected.
NOTE: There is a 15-minute auto shut off
on the unit for your safety.
Moving Quad-Roller
massage mechanism
With L.E.D. illumination
(blue when massage only
is on, red when heat is
turned on)
The actual product materials and fabrics may
vary from the picture shown.
9